Description
The Snap-on TER50FUA torque wrench sold here is the plain follow-up code, with no certificate in its title. If you need Snap-on’s documented model, see the TER50FUAC with Calibration Certificate instead. Both share one 3/8 inch dial, so three short questions can settle the order.
Plain TER50FUA or certified TER50FUAC?
Snap-on’s CAT1500i prints the TER50FUA in the Combination US/Newton Meter Reading/Precise 1% Accuracy table. According to the note under that table, chart wrenches carry no certificate of calibration. The C suffix adds one. So the TER50FUAC means extra paperwork, not a different dial.
Three questions before you choose a TER50FUA
Who writes the first record?
If your metrology room or a contract lab checks every new tool, the plain TER50FUA fits. Your own report then becomes the first entry in the file.
How soon must the wrench start work?
A tool needed on the line from day one cannot wait for a lab slot. In that case, the certificate code avoids the gap, while the TER50FUA suits a calmer schedule.
Does a customer ask for factory papers?
Some customers want the maker’s document rather than an internal report. Therefore check their rules before you settle on the plain TER50FUA.
Catalog facts for the Snap-on TER50FUA torque wrench
| Item | CAT1500i value |
|---|---|
| Square drive | 3/8 in |
| Metric scale | 60 N·m, 1 N·m steps |
| US scale | 600 in-lb, 20 in-lb steps |
| Length / width | 12-1/2 in / 2-11/16 in |
| Head depth, drive excluded | 1-1/4 in |
| Storage case | PB9 |
The TER50FUA uses two needles, one for the targeted torque and one for the torque reached. Also, the row lists a Basic TER50A and a signal TER50LA.
Getting good readings on the TER50FUA
Snap-on’s UK brochure suggests picking a wrench so the job sits near the middle of its scale. On this dial, that points to targets around 30 N·m. Below 12 N·m, the 20% mark, a smaller dial suits the work better. For example, the TER25FUA reads in N·cm up to 3,200. Also keep the TER50FUA between 0 and 100 °F, and plan periodic recalibration.
Sending a Snap-on TER50FUA torque wrench request
Lost in HCM supplies Snap-on dial wrenches in Vietnam and quotes each order. Spell out TER50FUA, so the plain follow-up code ships. Then ask Lost in HCM to price the TER50FUA. You can review neighboring ranges in our torque wrench category or get in touch with SMK Vietnam for a second opinion.
Quick answers on the plain TER50FUA
Will I find a flashing light on the TER50FUA?
No. It uses two needles. The light signal model in the same row is the TER50LA.
Is the TER50FUA longer than the TER25FUA?
Yes. CAT1500i gives 12-1/2 inches for the TER50FUA and 9-29/32 inches for the TER25FUA.
Can the plain TER50FUA come with a certificate?
Not under this code. Order the TER50FUAC if you want Snap-on’s certificate of calibration in the box.
Reviews
There are no reviews yet.