Snap-on TER50FUAC Torqometer, US/N·m Follow-up Dial Wrench, Precise 1%, 3/8″ Drive, with Calibration Certificate

Description

Breweries and soft drink plants in Vietnam run fillers, cappers and pumps around the clock. Each time a part comes off for cleaning or repair, it must then go back at the right torque. The Snap-on TER50FUAC Torqometer suits that work, with US and newton meter scales and a second needle that keeps the result. Its name also lists a calibration certificate.

Line maintenance with the Snap-on TER50FUAC Torqometer

For example, filler and capper heads carry many small bolts in a tight ring. A fitter may also need to reach under a guard, where the dial is hard to see. Because the follow-up needle stays at the torque achieved, the fitter can read it once the wrench is clear. That helps when the plant asks for a value on each work order.

TER50FUA catalog row

Snap-on prints these figures in the Precise 1% table for its US/newton meter range. That table adds that a C at the end of the stock number orders the certificate version, as in TER50FUAC.

Beverage plant jobs for the TER50FUAC

• Capper head and chuck bolts after a changeover.
• Filler valve and bowl fittings after a strip-down.
• Sanitary pump cover nuts after seal replacement.
• Conveyor gearbox cover and motor flange bolts.

First, check each joint against the machine maker’s manual. Then confirm it falls inside the dial.

The Precise 1% grade

Lost in HCM groups the TER50FUAC under Combination US/Newton Meter Reading/Precise 1% Accuracy. Snap-on defines Precise models as within 1% of reading, from 20% of full scale to full scale. On this dial, that band starts at 12 N·m or 120 in-lb. Therefore, a gentle cover screw below that point needs a smaller tool.

Care in wet production areas

Packaging halls stay wet, and cleaning foam reaches most surfaces. Carry the wrench in its case, and lay it on a dry tray while you work. Wipe the Snap-on TER50FUAC Torqometer with a dry cloth afterward, because chemical residue can harm the finish. Then book outside calibration on the cycle your food safety plan sets.

Order the Snap-on TER50FUAC Torqometer

This SMK Vietnam listing belongs to our partner Lost in HCM, which supplies the wrench in Vietnam. For a plant quote with certificate details, request a quote from Lost in HCM. You can also view other torque wrenches, visit snapon.com, or contact SMK Vietnam with plant questions.

Brewery and bottling FAQ for the TER50FUAC

Can the TER50FUAC go into a washdown area?

Take it in for the job, then bring it out. Keep it away from spray and cleaning chemicals, and dry it before storage.

Does it show both US and metric units?

Snap-on lists the base TER50FUA with a 60 N·m scale and a 600 in-lb scale on one dial.

Does it ship with a certificate?

Yes, its name includes a calibration certificate. Ask Lost in HCM which points the certificate covers.