Description
Auto parts plants in Vietnam often audit sensor brackets, small covers and connector housings. The CDI 2002MRMH torque wrench suits that work. It has a 3/8″ square drive and an adjustable range of 30-200 in-lb, which the listing also gives as 4.0-22.0 N·m. So a QA auditor can work from a customer spec in either unit.
Audit wrench or line wrench?
On a busy line, operators tighten and auditors verify. The 2002MRMH can serve both roles, but the needs differ. Line use favors one setting per station, while audits need quick changes between values. Because the range spans 30 to 200 in-lb, an auditor can move between several part numbers with one tool. Still, keep a shared station wrench at a single value, so no operator inherits the wrong setting.
Assembly points that suit the CDI 2002MRMH torque wrench
- Oxygen, speed and pressure sensor brackets.
- Throttle body, intake and small cover bolts.
- Connector housings and harness clamps.
- Small pump, fan and motor mounts in appliance and electronics plants.
2002MRMH or 2502MRMH?
Both CDI models start at 30 in-lb on a 3/8″ drive. The 2502MRMH reaches 250 in-lb, while the 2002MRMH stops at 200 in-lb, or 22.0 N·m. Pick the 2002MRMH when your top value sits well under 200 in-lb, since a tighter range keeps targets nearer mid-scale. In contrast, if specs approach 25 N·m, the 2502MRMH gives more room.
Pulling and storing the 2002MRMH
Hold the grip at its center and pull at 90 degrees to the handle. Use slow, even force, and stop as soon as the wrench signals. After the shift, return the CDI 2002MRMH torque wrench to its lowest setting. Also keep it in a labeled drawer slot, away from impact tools and solvents. Then plan routine checks on a bench tester, plus outside calibration on your quality cycle.
Getting a quote in Vietnam
Lost in HCM, our supply partner, quotes and delivers the 2002MRMH. Send the quantity and plant location when you request a quote from Lost in HCM. You can also browse our torque wrenches category, visit cditorque.com for brand details, or contact SMK Vietnam.
2002MRMH questions from QA teams
Can the CDI 2002MRMH torque wrench work from N·m specs?
Yes. The listing states the range in both units, 30-200 in-lb and 4.0-22.0 N·m. Lost in HCM can confirm the scale markings in its quote.
What is 200 in-lb in ft-lb?
About 16.7 ft-lb, because 12 in-lb make 1 ft-lb. That puts the 2002MRMH well below most 3/8″ ft-lb wrenches.
Does SMK Vietnam calibrate it?
No. Neither SMK Vietnam nor Lost in HCM calibrates tools, so send the 2002MRMH to an independent calibration lab.
Reviews
There are no reviews yet.