CDI 1502MRMH Torque Wrench, 3/8″ Drive Adjustable, 20-150 in-lb (2.8-15.3 N·m)

Description

Many maintenance kits standardize on 3/8″ sockets, yet small fasteners still turn up on every machine. The CDI 1502MRMH torque wrench lets those teams stay on one socket set. It combines a 3/8″ square drive with an adjustable range of 20-150 in-lb, listed in metric as 2.8-15.3 N·m.

Same range, bigger drive

CDI offers this range on two drives. The 1501MRMH uses a 1/4″ square, while the 1502MRMH moves up to 3/8″. So which should you pick? Match the drive to the sockets your team already carries. A 3/8″ drive also takes deep sockets and extensions from a standard kit, which helps on recessed bolts. However, a 1/4″ tool stays slimmer for very tight electronics work.

Machine maintenance with the CDI 1502MRMH torque wrench

• Pneumatic fittings, valve islands and cylinder mounts.
• Sensor and proximity switch brackets on conveyors.
• Guard, cover and hinge bolts on packaging and food machines.
• Small motor, gearbox cover and encoder mounts.

These fasteners rarely carry a high load. Even so, over-tightening can strip threads in aluminum frames, and the 1502MRMH helps prevent that.

Working between units

Machine manuals from Europe and Japan often give torque in N·m, while US parts lists use in-lb. Since 1 N·m equals about 8.85 in-lb, a 10 N·m spec works out near 88.5 in-lb. That sits comfortably inside the 1502MRMH range. In addition, the 150 in-lb top value equals 12.5 ft-lb.

Pull technique and storage

Seat the socket fully before you load the CDI 1502MRMH torque wrench. Then pull slowly at a right angle and stop at the signal, without a second tug. At the end of the day, wind the setting down to the bottom of the scale. Keep the wrench in its case, because a short fall onto concrete can shift the reading. Plan regular tester checks between outside calibration visits as well.

Order the CDI 1502MRMH torque wrench

SMK Vietnam lists this CDI wrench for Lost in HCM, which supplies it and sends the quote. To begin, request a quote from Lost in HCM and include your quantity. Browse nearby sizes under torque wrenches, see cditorque.com for brand details, or contact SMK Vietnam.

1502MRMH maintenance kit FAQ

Will my 3/8 in deep sockets fit the 1502MRMH?

Yes. It uses a standard 3/8″ square drive, so normal and deep 3/8″ sockets fit.

How does it differ from the 1501MRMH?

The range matches at 20-150 in-lb. The difference is the drive: 3/8″ on the 1502MRMH and 1/4″ on the 1501MRMH.

Who supplies it in Vietnam?

Lost in HCM supplies the 1502MRMH and confirms price and lead time in its quote.