Description
Solar farms in Ninh Thuan and Binh Thuan run thousands of combiner boxes and inverter enclosures. Each one has terminal and cover screws that loosen with daily heat cycles. The Snap-on TQSS6A torque driver lets an O&M technician read the actual torque on those screws, up to 75 in-lb. Its short body also fits between fuse holders and cable glands.
Solar farm rounds with the Snap-on TQSS6A torque driver
Preventive rounds at a PV plant often pair a thermal camera scan with a torque check. A hot spot on a terminal, for instance, usually points to a loose joint. Typical TQSS6A tasks include:
- Fuse holder and terminal block screws in string combiner boxes.
- Cover and gland plate screws on string inverters.
- DC isolator terminals, where the device label gives a value in range.
- Weather station and sensor mounting screws.
PV strings stay live in daylight. Snap-on does not describe this driver as insulated, so follow your isolation and lockout procedure first.
Top row of the U.S. driver chart
In the Snap-on Torqometer U.S. table, 75 in-lb is the largest scale. The Snap-on TQSS6A torque driver carries it on the short body.
| Feature | TQSS6A |
|---|---|
| Model style | Stubby Basic, single needle |
| Scale | 75 in-lb, read in 1 in-lb steps |
| Metric equivalent | roughly 8.5 N·m at full scale |
| Body | 5-1/4 inches |
| Handle | takes a 1/4 inch square drive |
| Case | PB47 storage case |
Using the 1/4 inch square in the grip
Snap-on marks the 50 and 75 in-lb drivers as having a 1/4 inch internal square drive in the handle. As a result, the TQSS6A can take a small socket or a square-drive bit holder. Therefore one tool covers both slotted terminal screws and small hex nuts on brackets.
Stubby or full length at 75 in-lb?
The full-length TQS6A runs 8-11/16 inches, which gives more leverage near the top of the scale. In contrast, the TQSS6A gives up some grip so it can reach inside shallow enclosures. Meanwhile, the stubby TQSS6FUA adds a peak needle for audit records. If most of your values sit under 50 in-lb, the TQSS4A reads them with more of the dial in use. Also remember the 2% band, which on this model starts around 15 in-lb.
Heat, dust and the TQSS6A
Field tools ride in hot vans and dusty sheds. So keep the Snap-on TQSS6A torque driver in its PB47 case between boxes, and do not leave it on a dashboard in the sun. Wipe sand off the shaft before you return it. In addition, let it settle to the room temperature before a careful reading, and send it for checks at the interval your quality plan sets.
Pricing the Snap-on TQSS6A torque driver for O&M teams
Lost in HCM, our supply partner, handles stock, pricing and delivery for the TQSS6A. Please request a quote from Lost in HCM with your quantity and site. For other sizes, browse torque screwdrivers. Maker data sits on snapon.com, and you can always contact SMK Vietnam for help.
PV maintenance questions on the TQSS6A
Can the TQSS6A take a socket?
Yes. Its handle has a 1/4 inch internal square drive, so it accepts small 1/4 inch drive sockets and adapters.
Is 75 in-lb enough for combiner box terminals?
Many small terminals fall well inside it. However, the fuse holder or terminal label always sets the value, so read it first.
Can the TQSS6A record a peak for our reports?
No. It shows live torque only. Choose the TQSS6FUA if your report needs a held reading.
Reviews
There are no reviews yet.