Description
Garment and footwear plants in Vietnam run long rows of industrial sewing machines on every floor. Mechanics keep those rows stitching by resetting hooks, needle bars, feed dogs and presser feet between shifts. The Snap-on TQSS4FUAC torque driver gives them a real number for each critical screw. It is a short Torqometer dial driver with a U.S. scale and a follow-up needle, and the partner title adds a chart.
Sewing machine repair with the Snap-on TQSS4FUAC torque driver
Most repairs happen under the machine bed or behind the face plate, where space runs out fast. A 5-1/4 inch body slips into those gaps more easily than a full-length driver. So the mechanic snugs a hook or feed dog screw, pulls the tool out, and then reads the held needle. In addition, a logged value helps when a line leader asks why a machine skipped stitches after service.
TQSS4FUA data from the U.S. driver chart
| Item | TQSS4FUA |
|---|---|
| Model type | Stubby follow-up (2 needles) |
| Length | 5-1/4 in |
| Range | 50 in-lb |
| Increments | 1 in-lb |
| Family | Torqometer drivers, 1/4 in drive |
| Case | PB47 storage case |
Snap-on prints this row in the U.S. Reading driver chart of catalog CAT1500i, and its 2005 Torqometer notice lists the same figures. That chart says its drivers come without a certificate of calibration. However, a C added to the stock number orders the certificate version, per the catalog. That makes the TQSS4FUAC the certificate twin of the base TQSS4FUA. Because the partner title mentions a chart, ask Lost in HCM which papers travel with it.
Picking targets on the TQSS4FUAC dial
Snap-on holds this grade to 2% of reading from one-fifth of full scale upward. On the TQSS4FUAC, that band runs from 10 in-lb to 50 in-lb, or roughly 1.1 to 5.6 N·m. Sewing machine brands publish their own values, so take each number from the service manual first. If most of your targets sit under 10 in-lb, a lighter stubby such as the 24 in-lb TQSS2FUA reads them more finely.
Snap-on TQSS4FUAC torque driver care on a lint-heavy floor
Lint and oil mist land on every tool near a sewing line. Therefore wipe the driver after each job and return it to its PB47 case. Also zero the follow-up needle before each screw, since the last peak stays on the dial until you clear it. Turn smoothly as the screw seats, because a sudden twist pushes the needle past the true value. Then book the TQSS4FUAC for recalibration on the cycle your plant sets.
Quote the TQSS4FUAC through Lost in HCM
Lost in HCM supplies this stubby driver and writes every quote. For a maintenance crib or a roving repair team, request a quote from Lost in HCM. Other dial and clutch models sit in the SMK Vietnam torque screwdrivers range, while snapon.com carries the maker’s own data. Listing questions can also go to SMK Vietnam, so feel free to contact SMK Vietnam.
TQSS4FUAC sewing mechanic FAQ
Does the TQSS4FUAC replace the sewing machine maker’s gauges?
No. Hook timing, needle height and feed settings still need the maker’s gauges. The driver only shows how tight each screw ended up.
Why use a dial driver for repairs instead of a preset clutch tool?
A mechanic meets many screw values in one shift. With a dial, one TQSS4FUAC covers them all, and the held needle shows what each screw reached.
Does the TQSS4FUAC read in newton meters?
No, it sits in Snap-on’s U.S. Reading chart, which lists 50 in-lb. Multiply in-lb by about 0.113 when a manual gives N·m.
Reviews
There are no reviews yet.