Description
Server builders and data center teams in Vietnam handle heat sinks, riser cards, drive cages and rack rails every week. Hardware guides for that kit often give screw torque in N·m, while some US parts lists use in-lb. The Snap-on TQSR4FUA torque driver shows both scales on one dial. In addition, its follow-up needle keeps the peak, so a technician can read it once the screw has seated.
Server and rack work with the Snap-on TQSR4FUA torque driver
A heat sink that clamps unevenly can leave a poor thermal contact on a processor. Similarly, a loose rail screw lets a heavy chassis sag in the rack. So build and field teams check those fasteners against the platform guide. With this driver, they turn to the listed value, then read the second needle and log it on the work order.
Catalog rows for the TQSR4FUA
| Item | TQSR4FUA |
|---|---|
| Model type | Standard follow-up (2 needles) |
| Length | 8-11/16 in |
| Range | 5.5 N·m / 50 in-lb |
| Increments | 0.1 N·m / 1 in-lb |
| Handle | 1/4 in internal square drive |
| Case | PB47 storage case |
Snap-on prints this row in the Combination US/Newton Meter table of catalog CAT1500i. Its 2005 Torqometer notice also lists the TQSR4FUA with the same range, steps and length. The catalog adds that these drivers ship without a certificate unless a C ends the stock number. Snap-on also offers Precise 1% models on special order.
Why the TQSR4FUA handle has a square drive
The handle carries a 1/4 inch internal square drive, so a short socket adapter or bit holder can sit in it. That helps when a fastener takes a small hex socket instead of a screwdriver bit. However, keep the stack short and straight, because a long wobbly extension spoils the reading.
Working band of the Snap-on TQSR4FUA torque driver
Snap-on rates the standard grade within 2% of reading from 20% of full scale to full scale. For this model, the band starts at 1.1 N·m, or 10 in-lb, and ends at 5.5 N·m. Most rack and chassis values in that span suit it well. For lighter screws, the TQSR2.5FUA tops out at 3.4 N·m, while the TQSR6FUA reaches 8.4 N·m.
Data hall care for the TQSR4FUA
Reset the follow-up needle before each fastener, and turn at an even pace. Also follow your site’s ESD rules, since the listing makes no ESD claim for this driver. Keep it in its PB47 case in the tool cart. Then send it for calibration on the schedule your quality system sets.
Ordering the Snap-on TQSR4FUA torque driver
Lost in HCM supplies the driver and prepares each quote for SMK Vietnam buyers. To price one for a build line or a service team, request a quote from Lost in HCM. Browse more torque screwdrivers on SMK Vietnam, see snapon.com for the maker, or contact SMK Vietnam.
TQSR4FUA server room FAQ
Can the TQSR4FUA tighten processor heat sink screws?
If the platform guide gives a value between 1.1 and 5.5 N·m, the dial covers it. Follow the guide’s tightening order, because many heat sinks need a cross pattern.
Does the TQSR4FUA come with a certificate of calibration?
Not as listed, because the TQSR4FUA code lacks the C suffix. Per the catalog, the TQSR4FUAC is the certificate version, so ask Lost in HCM about it.
Which unit should my work order record?
Record the unit that your hardware guide uses. The TQSR4FUA dial shows N·m and in-lb, so no conversion is needed.
Reviews
There are no reviews yet.