Description
Petrol stations along every highway in Vietnam rely on fuel dispensers that run from dawn to late at night. Service technicians open those dispensers for meter checks, display swaps and nozzle switch repairs. The Snap-on TQSC1FUA torque driver helps them close each panel and board to a known value. Its dial reads kg·cm and in-lb, while a follow-up needle keeps the peak.
Dispenser jobs that suit the Snap-on TQSC1FUA torque driver
- Display and keypad board screws in the head of the dispenser.
- Pulser and encoder mounting screws on the meter.
- Nozzle boot switch and bracket screws.
- Terminal screws in junction boxes, where the maker gives a value.
However, dispenser work happens near fuel vapor. So follow the station’s permit and isolation steps, and take every value from the dispenser maker’s manual.
TQSC1FUA data from Snap-on
| Item | TQSC1FUA (CAT1500i p.336) |
|---|---|
| Model type | Standard follow-up, 2 needles |
| Length | 7-3/4 in |
| Range | 17 kg·cm / 15 in-lb |
| Increments | 0.5 kg·cm / 0.5 in-lb |
| Stubby twin | TQSSC1FUA, 5-1/4 in |
| Case | PB47 storage case |
These values sit in the combination U.S./metric driver table of catalog CAT1500i. That table also explains that its drivers ship without a certificate of calibration. Instead, a C on the end of the stock number orders one. Because the TQSC1FUA has no C, plan a check when it reaches your workshop.
Two units for mixed brands
Station networks often run dispensers from Japan, Korea, Europe and the US side by side. As a result, one manual may print kgf·cm while another uses in-lb. The TQSC1FUA shows both scales on one face. Thus a technician reads each value as printed and avoids a quick sum on the forecourt.
Low-end limits of the Snap-on TQSC1FUA torque driver
Lost in HCM lists this driver under Combination US/Metric Reading/Standard 2% Accuracy. Snap-on sets that grade at 2% of reading from 20% of full scale to the top. So the trusted band begins at 3 in-lb, or about 3.4 kg·cm. For heavier panel screws, the TQSC2.5FUA reaches 35 kg·cm / 30 in-lb.
Care in the service van
A service van gets hot, and tools also bounce around between stations. Therefore keep the Snap-on TQSC1FUA torque driver in its PB47 case, away from heavy tools. Also reset the second needle before each screw, and never push the dial past full scale. Then book it for recalibration on your quality cycle.
Order the TQSC1FUA from Lost in HCM
Lost in HCM supplies this driver and prepares every quote. For a fuel retail network or a dispenser service firm, request a quote from Lost in HCM. More torque screwdrivers appear on SMK Vietnam. Product background lives on snapon.com, and you can contact SMK Vietnam with questions.
Forecourt technician FAQ
Can I take the TQSC1FUA into a hazardous zone?
The source makes no hazardous-area claim for this driver. Follow the station’s permit, isolation and gas-free rules before any dispenser work.
What does 17 kg·cm equal in N·m?
About 1.7 N·m, since one kg·cm is close to 0.098 N·m. The TQSC1FUA prints kg·cm and in-lb, not N·m.
Does the TQSC1FUA include a certificate?
Not under this code. Per the catalog, adding C to the stock number orders the certified version, so ask Lost in HCM about the TQSC1FUAC.
Reviews
There are no reviews yet.