Snap-on TQS4FUA Torque Driver, U.S. Follow-up Dial, 50 in-lb, 8-11/16″ Body, 1/4″ Square in Handle

Description

The Snap-on TQS4FUA torque driver appears here under its plain code, as Lost in HCM’s U.S. Follow-up Torque Driver. Buyers who need a document with the tool should open the TQS4FUAC listing with chart. Otherwise, the two codes describe one 50 in-lb driver with an 8-11/16 inch body.

One dial, two listings for the TQS4FUA

Snap-on’s driver table explains the split in one line. Codes in the chart come without a certificate of calibration, while a final C orders one. Therefore the TQS4FUA keeps the needles, the scale and the handle of its twin.

Choose the TQS4FUA when

• your plant sends each new gauge to an outside calibration provider before first use
• the driver joins a maintenance kit rather than a final-test station
• budget matters more than a record on delivery day

Choose the TQS4FUAC when

• an auditor will ask for a certificate during the first visit
• incoming inspection holds back tools that arrive with no document
• the driver goes straight to a release station with no lab slot

The square drive inside the Snap-on TQS4FUA torque driver handle

A footnote in the table marks this size with a 1/4 inch internal square drive in the handle. So a technician can work with 1/4 inch square-drive accessories at the handle end. Before you order, confirm the fit of your adaptors with Lost in HCM.

TQS4FUA numbers in brief

Snap-on lists the TQS4FUA as a Standard Follow-up model with two needles. Its dial reads to 50 in-lb in 1 in-lb steps. In addition, the body measures 8-11/16 inches, longer than the 7-3/4 inch lower sizes. A PB47 storage case comes with it, and the table carries the heading Standard 2% Accuracy.

On the Snap-on TQS4FUA torque driver, keep most targets near the middle of the dial, around 25 in-lb, as the UK brochure advises. Below 10 in-lb, which is 20% of full scale, a smaller size will serve you better.

Requesting the Snap-on TQS4FUA torque driver

Lost in HCM handles supply and pricing for this driver in Vietnam. Name the plain code, the quantity and any adaptors, then request a quote from Lost in HCM. Our torque screwdriver listings cover the lighter dials, and SMK Vietnam can answer sizing questions first.

TQS4FUA FAQ

Will the plain TQS4FUA pass our audit?

That depends on your quality plan. If it calls for a certificate on arrival, order the C code or book an outside check before first use.

Is there a stubby version at 50 in-lb?

Yes. Snap-on lists the TQSS4FUA with a 5-1/4 inch body in the same row of the table.

What should we avoid with this driver?

Snap-on warns users not to exceed rated torque and not to break fasteners loose with Torqometer tools.