Snap-on TQFR250EG Torque Wrench, Green 1/2″ Drive Flex Head, 40-250 ft-lb, TQ Series

Description

During a plant shutdown, contractor crews and in-house teams often work side by side. As a result, tools mix and some walk off site. The Snap-on TQFR250EG torque wrench gives your own crew a clear mark, since it carries a green finish. Mechanically, you get the 1/2″ drive TQ flex-head design and a 40-250 ft-lb scale.

Marking ownership with the Snap-on TQFR250EG torque wrench

First, give the green kit to your in-house crew, and leave red for contractors or the general crib. At gate checks, guards can then see which wrenches belong to the plant. Also, after the shutdown, a quick count shows whether every green tool came back. This small step can save the cost of a replacement wrench and its first calibration.

Snap-on TQFR250EG torque wrench essentials

• Drive: 1/2 in square, covering 40-250 ft-lb.
• Steps: 5 ft-lb, per Snap-on’s catalog table for the TQFR250E line.
• Head: a ratchet that also flexes up to 15°.
• Accuracy: ±4% of any clockwise setting.
• Grip: composite, so less heat and cold reach your hand.

Shutdown jobs in range

A 40-250 ft-lb scale covers pump and motor base bolts, coupling guards, small flange bolts and valve actuator mounts. For big flanges, however, you will need a 3/4″ drive wrench or a torque multiplier. The flex head of the TQFR250EG helps on pipe racks, because you can angle the handle past nearby lines.

Before the crew leaves

Next, wipe each green TQFR250EG, return it to its case and log its due date. Plan its next calibration within six months, as Snap-on’s torque brochure advises.

Order the green TQFR250EG

Lost in HCM supplies this green TQ wrench, while SMK Vietnam lists it for them. If you plan a shutdown, send your crew size and dates when you request a quote from Lost in HCM. Our torque wrenches page lists other sizes, and you can visit snapon.com or contact SMK Vietnam.

TQFR250EG questions

Is green only a cosmetic choice?

Mostly. Snap-on offered the TQFR250EG and TQFR250EO as color options of the same 1/2″ flex-head wrench.

Can the TQFR250EG reach bolts behind pipes?

Yes, within limits. The head flexes up to 15°, but do not force it against its stops.

Can the TQFR250EG show N·m values?

No, the scale shows ft-lb only, although a printed table on the handle converts to N·m.