Description
Steel mills in Ha Tinh, Quang Ngai and Hai Duong run rolling stands, gearboxes and roll chocks held by very large bolts. During a planned stop, crews have hours, not days, to tighten them. The Snap-on TEXC3005TL Torqometer helps them move fast with a lamp that marks each target. Built as a T-handle dial head, it reads in both U.S. and metric units and needs no click.
Why a lamp helps in a rolling mill
Mill bays stay loud even during a stop, because fans, cranes and cutting torches keep running. Fitters also wear heavy gloves, face shields and heat jackets. In that setting, Snap-on’s signal light gives a clear cue when the wrench reaches the preset value. Meanwhile, the dial still shows the real number, so the lead hand can note it before the next bolt.
Snap-on TEXC3005TL Torqometer specifications
| Item | TEXC3005TL |
|---|---|
| Input drive, female square | 1-1/2 in |
| Output drive, male square | 1-1/2 in |
| U.S. scale | 3,000 ft-lb, 100 ft-lb steps |
| Metric scale | 400 kg·m, 5 kg·m steps |
| Optional T bar / extension handle | 83TQP / 87TQP |
Snap-on lists these figures in the combination T-handle table of its CAT1500i catalog. Because the code ends in L rather than C, it is the standard stock number. That table states such numbers ship without a certificate of calibration, and a C suffix adds one.
Mill jobs that fit a 3,000 ft-lb head
- Roll chock and housing bolts on a stand change.
- Gearbox and pinion stand foot bolts.
- Coupling and spindle carrier bolts.
- Large motor base bolts in the drive room.
Snap-on rates the standard grade within 2% of reading from 20% of full scale to full scale. On the TEXC3005TL, that band starts near 600 ft-lb, or 80 kg·m. So use it for big joints, and pick a smaller head for light covers and guards.
Signal or follow-up?
The same table lists a TEXC3005TFU follow-up head at the same size. A follow-up head keeps a second needle at the peak, which suits signed records. By contrast, the light signal Snap-on TEXC3005TL Torqometer suits fast, repeated tightening during a stop. Many mills keep one of each, then use the follow-up head for later audits.
Care between stops
Heat and scale dust are hard on any dial. Therefore store the head in its case away from the furnace line, and test the lamp before each stop. Also keep the T bar straight, and never use the TEXC3005TL to break a seized nut. Then plan outside calibration on the cycle your quality team sets.
Quote for the Snap-on TEXC3005TL Torqometer
Lost in HCM supplies this head and handles the quote. Send your plant details and request a quote from Lost in HCM. You can also see other torque wrenches, visit snapon.com, or contact SMK Vietnam.
Steel mill FAQ
Does the TEXC3005TL need a long handle?
Yes, in practice. Snap-on lists the 83TQP T bar and 87TQP extension handle as options, so add one to your quote if needed.
Can I get it with a certificate?
Snap-on’s catalog offers certified versions by adding a C to the stock number. Ask Lost in HCM about the TEXC3005TLC.
How does 400 kg·m compare with N·m?
Multiply by about 9.81. So the metric full scale equals roughly 3,920 N·m.
Reviews
There are no reviews yet.