Snap-on TESI60FUC Torque Wrench, Newton Meter Follow-up Torqometer, 3/8″ Drive, 60 N·m, with Calibration Certificate

Description

Drug makers in Binh Duong, Long An and Hanoi press millions of tablets every week. Also, their rotary presses, coating pans and capsule fillers come apart often for cleaning and format changes. Each rebuild then ends with bolts that must go back to the maker’s value. The Snap-on TESI60FUC torque wrench gives the technician a newton meter dial with two needles and a calibration certificate.

GMP records and a second needle

In fact, good manufacturing practice asks plants to show that equipment work follows a written method. So a technician who records a real torque leaves a clearer trail than one who ticks a box. On Snap-on’s Follow-up models, one needle marks the targeted torque while the other shows the torque achieved. As a result, the TESI60FUC lets the tech write the measured value on the maintenance record.

Specs from the TESI60FU row

Snap-on prints these values in the Newton Meter Reading/Standard 2% Accuracy table of catalog CAT1500i. According to that table, adding a C to the stock number orders the certificate of calibration model. Hence the TESI60FUC is the TESI60FU with its certificate, as the Lost in HCM name states.

Tablet room jobs for the Snap-on TESI60FUC torque wrench

• Feeder frame, cam and guard bolts on rotary tablet presses.
• Turret and die table fixings, where the press maker lists a torque.
• Spray arm, baffle and door bolts on coating pans.
• Dosing disc and segment screws on capsule fillers.

In particular, press makers often give tight values for punch guides and turret parts. Therefore check each figure in the manual, and confirm it sits within the dial before you start.

Reading the 2% band

Lost in HCM groups this wrench under Newton Meter Reading/Standard 2% Accuracy. In short, Snap-on holds that grade within 2% of reading, from 20% of full scale to full scale. So on the Snap-on TESI60FUC torque wrench, readings from 12 N·m to 60 N·m fall inside the band. Below 12 N·m, a torque screwdriver suits small screws better.

Cleanroom care for the TESI60FUC

Tablet suites run under strict cleaning rules, and tools must not carry dust or grease inside. So wipe the wrench with a lint-free cloth and the agent your SOP allows, then dry it. Also keep it in its PB9 case outside the compression room. Never use it to free a bolt that has seized. Then plan recalibration with an outside lab on your QA schedule, and keep the certificate with the tool record.

Ordering the Snap-on TESI60FUC torque wrench

Pharma plants and contract makers can buy this wrench from Lost in HCM, which supplies the SMK Vietnam listing. To match it to your press fleet, request a quote from Lost in HCM. See our wider torque wrenches range, visit snapon.com, or contact SMK Vietnam with questions.

Tablet press FAQ for the TESI60FUC

May the wrench enter a cleanroom?

That depends on your site’s rules. Clean and bag it as your SOP sets before it goes in.

Why not use a click wrench?

A click wrench, by contrast, only signals the set point. The TESI60FUC also shows the value it reached, which helps your records.

Is the certificate enough for our QA file?

The listing names a calibration certificate. Your QA team decides whether it meets your own rules, and Lost in HCM can share a sample.