Description
The Snap-on TESI5 dial torque wrench on this page is the plain code that Lost in HCM lists as “Newton Meter Basic – TESI5”. Its name carries no certificate. Plants that need one on arrival should look at the TESI5C with a calibration certificate. Mechanically, Snap-on treats the two as one wrench.
Why two codes exist for the TESI5
Snap-on keeps paperwork separate from hardware. Its Newton Meter table says the wrenches in the chart arrive without a certificate of calibration. Meanwhile, a header note explains that the C suffix designates the certificate models. As a result, the TESI5 suits buyers who will create their own first record.
Spending wisely on a Snap-on TESI5 dial torque wrench
A small dial wrench often serves a few critical screws, such as sensor mounts or connector housings. For those joints, two costs matter: the wrench itself and the proof that it reads right.
- Pay for the TESI5C when a customer contract or audit plan demands a certificate from day one.
- Choose it as well when incoming inspection will not release a tool without a document.
- Save with the TESI5 when your own low-torque tester can verify the 1 to 5 N·m band.
- Save too when an outside lab already checks every new gauge on your behalf.
TESI5 catalog facts
Snap-on fits the TESI5 with a 1/4 inch square drive. Its dial reads to 5 N·m in fine 0.2 N·m steps. The body is 9-29/32 in long and 2-11/16 in wide, and the 1-1/4 in head depth leaves out the drive. The catalog pairs it with a PB9 case. Because it is a Basic model, one needle shows the torque achieved. If you want a second needle, the same row lists the TESI5FU, while the TESI5L adds a signal light.
Low-torque habits for the TESI5
Small torque values leave little room for error. So keep targets above 1 N·m, since Snap-on’s UK brochure warns about readings below 20% of full scale. Pull slowly, because a jerk can overshoot a fine scale. Also, store the wrench in its case between jobs. Finally, never exceed the rated torque or use the dial to free a seized screw.
Requesting the Snap-on TESI5 dial torque wrench
Lost in HCM supplies this tool in Vietnam and prepares every quote. Put TESI5 on the request for the plain version. Then ask Lost in HCM for a TESI5 quote, browse more torque wrenches, or contact SMK Vietnam if you are unsure which size fits. With either code, the Snap-on TESI5 dial torque wrench still needs periodic recalibration, as Snap-on states.
Questions about the plain TESI5
Does the TESI5 read in in-lb?
No. Snap-on places it in the Newton Meter Reading table rather than a combination scale, so plan your targets in N·m.
Is 0.2 N·m resolution fine enough for small screws?
That depends on the drawing value. For very light joints below 1 N·m, a torque screwdriver may suit the job better.
How do we get a certificate for a TESI5 we already own?
Snap-on offers the certificate through the C code at purchase. For a wrench already in service, your own lab or an outside lab can issue a report.
Reviews
There are no reviews yet.