Description
Bolted flanges on pressure vessels and heat exchangers must seal under heat and pressure. The Snap-on TESI2803FUC torque wrench helps inspectors confirm the torque on those bolts. It is a Torqometer follow-up dial wrench that reads in newton meters. Its source name also says it comes with a calibration certificate.
Follow-up readings on flange bolts
In practice, flange work often means pulling at odd angles from a platform or ladder. The follow-up pointer keeps the highest value after the pull ends. So the inspector can finish the move safely and then read the TESI2803FUC. Reset the pointer before each new bolt in the pattern.
Fitting the Snap-on TESI2803FUC torque wrench into a bolting plan
Most sites follow a bolting procedure for gasketed joints, such as one based on ASME PCC-1. That procedure sets the pattern, the passes and the final value. The wrench then checks or applies values within its range. However, a dial wrench does not replace hydraulic tensioners or torque multipliers on the largest studs. Use the method your procedure calls for.
Inspection tasks for the TESI2803FUC
- Final-pass checks on heat exchanger channel covers and shell flanges.
- Spot checks on manway and nozzle flanges after a shutdown.
- Audits of contractor bolting before a hydrotest.
- Checks on nearby pump and compressor casing bolts.
Range, drive and accuracy grade
Lost in HCM files the TESI2803FUC under Newton Meter Reading/Standard 2% Accuracy. Snap-on states that this grade holds from 20% of full scale to full scale, clockwise and counterclockwise. Its source name also lists a calibration certificate, which belongs in your bolting records. We could not match this C-suffix code to a Snap-on catalog entry. So Lost in HCM will need to confirm the range, length and drive size.
Safe handling on platforms
Tie off tools when you work at height, as your site rules require. Also keep a firm stance, because a slip mid-pull can spoil the reading and cause injury. Never use the Snap-on TESI2803FUC torque wrench to break loose seized nuts. Store it in a dry place, then recalibrate it on the interval your inspection plan sets.
Request the Snap-on TESI2803FUC torque wrench
Lost in HCM supplies this Torqometer in Vietnam, while SMK Vietnam lists it as a partner product. To confirm price and paperwork, request a quote from Lost in HCM. You can also look at other torque wrenches, read more at snapon.com, or contact SMK Vietnam about your shutdown scope.
Flange bolting FAQ
Can it replace a hydraulic tensioner?
No. Use the tool your bolting procedure names for each joint. The TESI2803FUC suits checks and joints within its range.
Why choose a follow-up model for flanges?
Because the pointer holds the peak, the inspector can read it after a hard pull in a tight spot.
Which documents come with the TESI2803FUC?
Its source name lists a calibration certificate. Lost in HCM can explain what it covers.
Reviews
There are no reviews yet.