Description
Receiving inspection is the last chance to catch a loose joint before it enters your plant. The Snap-on TESI250C Torqometer gives inspectors a simple way to check. It is a Basic dial wrench with a newton meter scale and a single indicating needle. Its listing also says it ships with a calibration certificate.
What incoming QC needs from a torque tool
Bought-in assemblies arrive with torque that a supplier already applied, so you cannot see it. As a result, the inspector needs a measurement, not a tightening signal. A dial shows the load as it builds, and the inspector watches for the point where the fastener turns. With the TESI250C, that value sits on a newton meter scale, which matches drawings that call out N·m. Then the reading goes on the receiving report.
The Basic layout of the Snap-on TESI250C Torqometer
Snap-on’s Torqometer tables split the line into Basic, Follow-up and Signal models. The Basic version uses one needle with no peak memory. Therefore the inspector reads the Snap-on TESI250C Torqometer during the pull, not afterward. For a trained QC team, that also keeps the tool simple and the routine quick. If your staff prefer to read after the pull, consider a follow-up model instead.
Typical receiving checks
- Sample audits on motor mounts, brackets and housings from a new supplier.
- Checks on parts from a lot that failed before.
- Spot tests when a supplier changes a process or a fastener.
- Evidence for a supplier corrective action request.
In each case, the TESI250C turns a supplier claim into a value you measured yourself.
Accuracy, range and paperwork for the TESI250C
Lost in HCM’s listing files the TESI250C under Newton Meter Reading/Standard 2% Accuracy. Snap-on applies that grade between 20% of full scale and full scale, turning either way. So pick a size that keeps your check values in that zone. The source does not list a range or drive for this exact model, and we do not guess one. Ask Lost in HCM to confirm both, plus what the calibration certificate covers.
Care on the inspection bench
Give the Snap-on TESI250C Torqometer a fixed home on the bench, inside its case. Then check that the needle reads zero at the start of each shift. Also avoid side loads on the handle, because they can upset the reading. Keep the certificate with your gauge records, and plan outside recalibration on your QC interval.
Get the Snap-on TESI250C Torqometer through Lost in HCM
SMK Vietnam lists this wrench for Lost in HCM, our partner for supply and quotes. To get pricing and certificate details, request a quote from Lost in HCM. Buyers can also browse other torque wrenches, see snapon.com, or contact SMK Vietnam if you need help choosing.
TESI250C inspection FAQ
Why a dial wrench for incoming QC?
It measures existing torque, which a click wrench cannot do. The TESI250C shows the value the moment the fastener turns.
Does it keep the highest reading?
No. It is a Basic model with one needle, so read the value during the pull.
Is the scale in newton meters?
Yes. Its listing names a Newton meter reading for the TESI250C.
Reviews
There are no reviews yet.