Description
Lost in HCM lists the Snap-on TER6A Torqometer as “US/ New. Met. Basic – TER6A”, the plain code with no certificate wording. It is a 1/4 inch drive dial wrench for light joints, with N·m and in-lb scales. If you need the document from the start, see the TER6AC with Calibration Certificate, the twin of this wrench.
What the plain TER6A code means
In Snap-on’s CAT1500i catalog, the TER6A sits in the Precise 1% Accuracy table. Under that table, Snap-on notes that the listed wrenches come without a certificate of calibration. Certificate models take a C suffix, which gives the TER6AC. So both codes name the same dial, and only the paperwork changes.
Labs and pilot lines that suit the Snap-on TER6A Torqometer
R&D centers in Hoa Lac and Saigon Hi-Tech Park build prototypes with small screws and fittings. Camera modules, sensor housings and connector brackets often need values under 8 N·m. For such teams, the TER6A gives a live reading on a light 1/4 inch drive. Moreover, many labs test their own tools on a bench tester, so a supplier certificate adds little. Then the saving can go toward bits and adaptors.
When to choose the TER6AC instead
Pick the certified twin if the prototype faces a customer audit soon. Likewise, choose it when a receiving rule blocks any gauge without a document.
TER6A specs at a glance
- Drive size: 1/4 inch square
- Newton meter side up to 8.4, in 0.2 N·m marks
- Inch-pound side up to 75, in 1 in-lb marks
- Body 9-29/32 in by 2-11/16 in
- Head depth 1-1/4 in when the drive is left out
- PB9 storage case and a Basic dial with one needle
The same row lists the TER6FUA Follow-up model. However, it shows no Signal version for this size. Snap-on’s UK brochure also advises a working range near the middle of capacity. So a target near 4 N·m sits close to the middle of this dial.
Reading a Basic dial on small screws
Small joints reach their value quickly, so pull slowly near the end. Also hold the wrench by the grip, not by the head. Because the TER6A has one needle, read it while the load is on. Then release smoothly. Finally, stay within rated torque, and do not use the Snap-on TER6A Torqometer to loosen screws.
Asking Lost in HCM for a TER6A quote
Lost in HCM supplies this wrench in Vietnam and sets the price on each request. Name the plain TER6A code, plus any adaptors your bench needs. Once the list is complete, request a quote from Lost in HCM. You can also review our torque wrenches or contact SMK Vietnam.
TER6A lab questions
Is a signal lamp option offered in this size?
No. Snap-on’s row lists Basic and Follow-up models only, with no Signal code.
What is 8.4 N·m in in-lb?
About 74 in-lb, and the US scale on the TER6A runs to 75 in-lb.
Does the plain TER6A ship in a case?
The catalog names a PB9 case on this row. Still, confirm the contents with Lost in HCM when it quotes.
Who sets the recheck interval?
Your quality plan does. Snap-on only states that periodic recalibration keeps a Torqometer accurate.
Reviews
There are no reviews yet.