Description
Furniture and gym equipment plants in Binh Duong and Dong Nai ship frames that people trust with their weight. The Snap-on TEC12LAC torque wrench helps QA staff check the bolts that hold those frames together. It is a Torqometer light signal wrench with a U.S. and metric dial. Its name also says it comes with a chart.
How the lamp helps a busy QA bench
The inspector sets a target on the TEC12LAC dial before the pull. When the torque reaches that value, a small lamp lights up. So the inspector can watch the part and the bolt, not only the needle. That helps late in a long shift, when eyes tire of reading fine marks.
Export specs and the Snap-on TEC12LAC torque wrench
Buyers in the US often send specs in inch-pounds or foot-pounds. Meanwhile, frame drawings from Asian design teams tend to use metric values. The TEC12LAC dual dial lets QA follow either document without a conversion sheet. Keep in mind that Snap-on’s U.S./metric tables print the metric side in kilogram-force units. Then compare that with the units on your own drawings.
QA checks that suit the TEC12LAC
- Frame and leg bolts on office chairs, desks and bed bases.
- Pivot and seat-post bolts on treadmills, bikes and weight benches.
- Hinge and bracket bolts on cabinets and storage racks.
- First-off checks when a new frame model starts on the line.
Also remember that the lamp marks a value you choose. So the QA team still needs a clear spec for each joint.
Grade and range of the TEC12LAC
In Lost in HCM’s listing, the TEC12LAC sits in the Combination US/Metric Reading/Standard 2% Accuracy group. Snap-on applies that 2% figure to readings between 20% of full scale and full scale, in either direction. We could not find this C-suffix code in a Snap-on catalog, so the range and drive are missing here on purpose. Ask Lost in HCM to state both, and to explain the chart, when it quotes.
Looking after the lamp and dial
Check that the lamp on the Snap-on TEC12LAC torque wrench works at the start of each shift. Ask Lost in HCM what powers the lamp, and keep spares on hand if it needs them. Also store the wrench in its case so the lens stays clean. In addition, never drop it onto the bench, because a shock can upset the reading. Plan outside calibration on the cycle your QA manual names.
Ordering the Snap-on TEC12LAC torque wrench
SMK Vietnam lists the TEC12LAC on behalf of its partner Lost in HCM, the supplier in Vietnam. For a price on one wrench or a set for several QA benches, request a quote from Lost in HCM. You can also browse torque wrenches, visit snapon.com, or contact SMK Vietnam about your QA line.
Furniture and fitness QA questions
Does the lamp stop the pull?
No. The lamp only signals the preset, so the inspector stops pulling once it lights.
Will the TEC12LAC hold a peak value?
It is a light signal model rather than a follow-up model. So do not count on a memory pointer, and ask Lost in HCM to confirm.
Which units does it read?
Both U.S. and metric units. Snap-on’s tables for this family show kilogram-force on the metric side.
Reviews
There are no reviews yet.