Snap-on TE51F Torqometer basic dial torque wrench with 1/2 inch square drive

Snap-on TE51F Torqometer Dial Torque Wrench, U.S. Basic, 50 ft-lb, 1/2″ Drive

Name: Snap-on TE51F Torqometer Dial Torque Wrench, U.S. Basic, 50 ft-lb, 1/2" Drive
SKU: LIH-TE51F
Availability: InStock

The Snap-on TE51F Torqometer is a basic dial torque wrench that reads to 50 ft-lb in 1 ft-lb steps. It uses a 1/2 inch drive on a 15 inch body. Buyers in Vietnam can order it from Lost in HCM.

SKU: LIH-TE51F

Category: Torque Wrenches

Description

Excavator and forklift workshops tend to standardize on 1/2 inch sockets, even for mid-size bolts. The Snap-on TE51F Torqometer fits that habit, because it pairs a 1/2 inch square drive with a 50 ft-lb dial in 1 ft-lb steps. So technicians can use the sockets already on the cart.

What CAT1500i shows for the TE51F

Model: basic, with one needle.
Drive: 1/2 inch square.
Range: 50 ft-lb, in 1 ft-lb increments.
Length: 15 inches.
Width: 2-11/16 inches.
Head depth: 1-5/16 inches, square drive excluded.
Storage case: none named in the row.

These figures come from page 333 of Snap-on catalog CAT1500i. That table also places the TE51F in the US Reading, Standard 2% Accuracy class.

A light scale on a 1/2 inch frame

The 1/2 inch rows of the catalog climb to 250 ft-lb, and the TE51F sits at the light end beside the TE51, which reads 600 in-lb. Its 15 inch body gives more leverage than the 12-1/2 inch TE50FA, so the same torque takes less hand force. In addition, a 1/2 inch drive accepts heavier sockets and extensions without an adapter. As a result, no extra joint sits between the dial and the bolt.

Hydraulic and machine service with the Snap-on TE51F Torqometer

Hydraulic split flanges, valve bank tie bolts and pump mounting bolts often need moderate torque in a confined space. Therefore, use the TE51F only where the published value falls within its 50 ft-lb scale. For example, a fitter can bring each flange bolt up in stages, crossing the pattern, while watching the needle. Because the dial shows every stage, the fitter also notices when one bolt takes far more effort than its neighbors.

Picking a model in the TE51F row

Snap-on lists three versions with the same scale. First, the TE51F is the basic model with one needle. The TE51FFU adds a follow-up needle for held readings, while the TE51FL adds a signal light. So pick the basic version when the user watches the dial throughout the pull.

Order the Snap-on TE51F Torqometer

Lost in HCM supplies the Snap-on TE51F Torqometer to equipment dealers, rental fleets and plant workshops in Vietnam. For price and lead time, get a TE51F quote from Lost in HCM. Other dial sizes sit in the SMK Vietnam torque wrenches category. You may also visit snapon.com or contact SMK Vietnam.

TE51F FAQ

How does the TE51F scale convert to N·m?

Its 50 ft-lb top value equals about 68 N·m, while one ft-lb on the dial is about 1.36 N·m.

Does a storage case come with the TE51F?

The catalog row shows a dash in the storage case column. So confirm the packaging with Lost in HCM when you ask for a quote.

How often does the TE51F need recalibration?

Snap-on says periodic recalibration keeps these wrenches accurate but leaves the interval to the user. So set it in your plant’s quality system, based on how hard the tool works.