Snap-on TE175L Torqometer, U.S. Light Signal Dial Wrench, 1/2″ Drive, 175 ft-lb

Description

Lost in HCM titles this code “TORQOMETER U.S. Light Signal – TE175L”, so the Snap-on TE175L Torqometer here is the plain version. For the listing with Chart, go to the TE175LC Light Signal page. Both cover a 1/2 inch, 175 ft-lb wrench with a signal light, so a crib manager can treat them as one tool with two paper options.

A crib manager’s view of the Snap-on TE175L Torqometer

In practice, every torque tool in a crib needs an asset number, a recall date and a first record. With the plain TE175L, your own system creates that record at the first check. With the C code, Snap-on adds a certificate of calibration, according to its catalog note. Lost in HCM lists that C version as TE175LC “with Chart”, without describing the chart. So the decision rests on who writes the first entry.

When the TE175LC earns its extra cost over the TE175L

• A customer audit falls in the same month as delivery.
• Your receiving rule blocks any gauge that has no document.
• The crib has no tester that reaches 175 ft-lb, so an outside lab would need the wrench first.

Where the plain TE175L saves money

For example, many cribs already run a bench tester for routine recalls. For them, the TE175L enters service after one in-house check, and the record lives in the same system as every other tool. Also, a spare wrench for a second shift rarely needs its own day-one document. In those cases, the plain Snap-on TE175L Torqometer leaves budget for sockets and extensions.

Specs shared by the TE175L and TE175LC

Signal timing on the Snap-on TE175L Torqometer

First, the TE175L flashes a built-in light when the user reaches the targeted torque. Snap-on’s brochure for the UK market quotes ±2% of reading for this grade, from one fifth of the scale upward. So the band starts at 35 ft-lb on this dial. In addition, the brochure favors a working range near mid-scale, around 90 ft-lb here. For lighter work, the TE100L reads 100 ft-lb, while the TE250L reaches 250 ft-lb.

Placing a TE175L order

For buyers in Vietnam, Lost in HCM is the supplier, and it quotes every order. Put the plain TE175L code on the request, together with the quantity. After that, request a TE175L quote from Lost in HCM, look through our torque wrenches, or contact SMK Vietnam. Once it is in the crib, keep it within its rated torque and never use it to free a stuck bolt.

TE175L crib questions

My spec sits close to 175 ft-lb. Should I size up?

Yes, that usually helps. The TE250L puts the same spec closer to mid-scale, which Snap-on’s brochure recommends.

What paperwork comes with the plain TE175L?

Snap-on says wrenches in the chart ship without a certificate of calibration. For anything else, ask Lost in HCM what the box holds.

How much drawer space does the TE175L need?

Snap-on lists it at 18-3/4 in, and it fits the PBR5 case.