Description
Waste-to-energy plants now burn city garbage near Hanoi, Can Tho and other provinces, turning it into steam and power. Their grates, fans and crane grabs work under heat, grit and constant load. During each planned outage, crews refit the heaviest of those bolts before the boiler fires again. The Snap-on TE1503LC Torqometer reads up to 1,500 ft-lb, and its lamp flashes when the bolt reaches the target.
Outage noise and a flashing lamp
Even during an outage, a waste plant rarely goes quiet, because other units and air tools keep running. In that din, the fitter cannot rely on sound, and the dial may sit at an awkward angle. So the lamp on the TE1503LC gives a cue the eye catches at once, and the needle then gives the number for the log.
TE1503L catalog row
| Item | TE1503L (CAT1500i p.333) |
|---|---|
| Square drive | 1 in |
| Range | 1,500 ft-lb |
| Increments | 25 ft-lb |
| Length | 80 in |
| Width / head depth | 4-13/32 in / 2-1/8 in |
| Extension handle | 93TQPA 5 ft tubular, packed separately (catalog footnote) |
This row comes from Snap-on’s US Reading/Standard 2% Accuracy table. The catalog also says to add a C suffix for the certificate of calibration model. Lost in HCM, however, names the TE1503LC the with Chart version, so confirm the paperwork before you order.
Plant joints for the Snap-on TE1503LC Torqometer
- Grate drive, hydraulic ram and frame bolts, where the grate maker gives a value.
- Induced draft and forced draft fan base and bearing bolts.
- Waste crane trolley, grab and rail clamp bolts.
- Turbine and gearbox baseplate bolts within the dial range.
Some boiler and turbine joints use studs with hydraulic tensioners. In those cases, the plant maker’s method comes first, and the dial covers only the joints with a torque figure.
Two people, one long lever
At 80 inches, plus the separately packed 5-foot handle in the catalog, the Snap-on TE1503LC Torqometer needs a team. One person pulls while another holds the head square and watches for the flash. For seized bolts, reach for a slugging wrench or a multiplier, never the Torqometer.
The 2% band from 300 ft-lb
Lost in HCM lists the TE1503LC under US Reading/Standard 2% Accuracy. Snap-on’s Standard grade holds within 2% of reading from 20% of full scale to the top. As a result, this dial sits in band from 300 ft-lb up to 1,500 ft-lb.
Ash, heat and storage
Fly ash and fine grit settle on every surface around the boiler. Therefore wipe the TE1503LC with a dry cloth, and store it flat in a cool, dry room. Snap-on rates its dial wrenches for 0 to 100 °F, so keep it off hot casings and ducts. Then plan recalibration with an outside lab between outages.
Order the Snap-on TE1503LC Torqometer
Plant operators, EPC firms and boiler service teams can order the Snap-on TE1503LC Torqometer from Lost in HCM, which supplies the listing for SMK Vietnam. To have it ready for the next outage, request a quote from Lost in HCM. Lighter dials sit under torque wrenches, and the maker’s site is snapon.com. For help with sizing, contact SMK Vietnam.
Outage crew FAQ for the TE1503LC
Is the 5-foot handle included?
Snap-on’s footnote lists a separately packed 93TQPA 5-foot tubular handle with the base TE1503L. Lost in HCM can confirm whether your unit includes it.
Can I use it below 300 ft-lb?
It still turns, but the 2% band starts at 300 ft-lb. Use a smaller dial for lighter bolts.
Reviews
There are no reviews yet.