Description
Car washes now sit beside fuel stations and malls in many Vietnamese cities. Each automatic bay runs pumps, spray arches and brush drives through thousands of cycles a month. So service technicians open those machines often, and many small bolts carry a set torque. The Snap-on TE12LAC Torqometer suits that work, with a 150 in-lb dial and a lamp that flashes at the target.
A lamp for a wet, loud bay
Wash bays echo with pumps and blowers, and mist hangs in the air. As a result, watching a dial through that haze is hard. The Snap-on TE12LAC Torqometer solves it with Snap-on’s Signal design, a built-in light that flashes once the pull hits the targeted torque. Then the technician stops and reads the needle for the log.
TE12LA row in Snap-on’s catalog
| Item | TE12LA (CAT1500i p.333) |
|---|---|
| Square drive | 3/8 in |
| Range | 150 in-lb |
| Increments | 2-1/2 in-lb |
| Length | 9-29/32 in |
| Width | 2-11/16 in |
| Head depth | 1-1/4 in |
| Storage case | PB9 |
Snap-on lists the base code TE12LA in its US Reading/Standard 2% Accuracy table. A note on that page explains that a C suffix on the stock number marks a certificate of calibration model. That makes the TE12LAC the certificate version of the TE12LA. Because Lost in HCM titles it with Chart, check the paperwork when you request a quote.
Car wash jobs for the Snap-on TE12LAC Torqometer
- Cover and head bolts on high-pressure plunger pumps, where the pump maker gives a value.
- Clamp screws on spray arches and nozzle bars.
- Gearbox cover and motor bracket bolts on brush drives.
- Sensor, photo eye and cabinet bracket screws.
However, pump makers often set a tightening pattern for head bolts. So follow that sequence and use the TE12LAC to hit each step.
Using the 2% band well
Lost in HCM’s category for the TE12LAC is US Reading/Standard 2% Accuracy. For Snap-on, that label means a 2% of reading tolerance anywhere from 20% of the scale to full scale. Thus, on the TE12LAC, the band starts at 30 in-lb. So pump and bracket bolts in the 30 to 150 in-lb span sit inside it.
Keeping a dial wrench dry
Wash chemicals and spray can attack any tool. So wipe the TE12LAC dry after each job, and store it in its PB9 case away from the chemical room. Also, Snap-on gives an operating range of 0 to 100 °F for the line. It also warns never to use a Torqometer to break fasteners loose, and it says periodic recalibration is necessary.
Get a quote for the Snap-on TE12LAC Torqometer
Car wash makers, distributors and service contractors can order this wrench from Lost in HCM, the partner that supplies SMK Vietnam. If you need one or a set for several bays, request a quote from Lost in HCM. Compare other torque wrenches, read about the brand at snapon.com, or contact SMK Vietnam.
Car wash service FAQ
Does the TE12LAC read N·m?
No, it reads in-lb. So its 150 in-lb top end equals about 17 N·m.
How does the signal lamp help?
It flashes at the targeted torque. So you can stop on time without staring at the dial in mist or poor light.
Is a certificate included?
Lost in HCM titles it with Chart, and the catalog ties the C suffix to a certificate of calibration. Ask Lost in HCM to confirm the documents.
Reviews
There are no reviews yet.