Description
The Snap-on TE12FFUA Torqometer is the catalog code itself. On Lost in HCM, it reads “TORQOMETER U.S. Follow-up – TE12FFUA”, and nothing about a chart follows. If your file needs more, go to the TE12FFUAC wrench page with Chart. Both share one 12 ft-lb dial on a 3/8 inch drive.
Decision table: TE12FFUA or TE12FFUAC
| Your situation | Code to order |
|---|---|
| Auditor wants a record per tool from day one | TE12FFUAC |
| Receiving holds gauges that arrive with no document | TE12FFUAC |
| In-house tester covers 12 ft-lb | TE12FFUA |
| Spare tool, checked against a master | TE12FFUA |
| Outside lab checks every new tool anyway | TE12FFUA |
Snap-on explains the C suffix in a note under its table. Wrenches in the chart arrive without a certificate of calibration, while C models add one. Lost in HCM calls the extra item a chart, yet it does not list what the chart holds.
Why the base Snap-on TE12FFUA Torqometer still suits many benches
Low-torque joints often sit on repair and test benches, not on the audited line. There, a sound tool plus your own check is the norm. Also, buyers who equip several benches can save the chart code for the one station that faces customers. In short, the Snap-on TE12FFUA Torqometer covers the bulk of bench work.
Half-pound steps on the Snap-on TE12FFUA Torqometer
- 12 ft-lb full scale, about 16 N·m, marked every 1/2 ft-lb
- 3/8 inch square drive
- Body: 9-29/32 in by 2-11/16 in, with a head 1-1/4 in deep, drive excluded
- Case: PB9
- Row partners: TE12FA Basic and TE12FLA signal
Moreover, Snap-on’s TE12FUA covers a similar span as 150 in-lb, if your drawings use inch-pounds.
Looking after the TE12FFUA between checks
Snap-on rates these dial wrenches for 0 to 100 °F, so keep them away from ovens and hot engine bays. Then store the tool in its case after each shift. Finally, stay under 12 ft-lb, and book periodic checks, because Snap-on says they maintain accuracy.
Getting TE12FFUA pricing
Lost in HCM supplies Snap-on tools in Vietnam and prices each order. Note TE12FFUA without the C when you write in. So reach Lost in HCM for TE12FFUA pricing. See also the torque wrench range, or contact SMK Vietnam.
TE12FFUA bench buyer FAQ
Which code reads a similar span in in-lb?
The TE12FUA does. It reads 150 in-lb on the same 3/8 inch drive, per Snap-on.
Does heat affect the TE12FFUA?
Snap-on gives an operating range of 0 to 100 °F. So avoid hot spots on the shop floor.
Where does the TE12FFUA sit in the Snap-on lineup?
It is the two-needle model in a row that also holds the TE12FA Basic and the TE12FLA signal wrench.
Reviews
There are no reviews yet.