Description
Here you find the Snap-on TE1003FU dial wrench in the code Lost in HCM lists as “TORQOMETER U.S. Follow-up – TE1003FU”. No chart appears in that name. Its counterpart, the TE1003FUC Torqometer offered with Chart, shares the same 1 inch head and 1,000 ft-lb dial.
Plain code, same heavy TE1003FU head
Snap-on’s catalog prints one row for this size. Under the table, a note says the listed wrenches come without a certificate of calibration. It also says a C suffix orders the certificate model. So the gap between the two codes is the paper, while the steel stays identical.
Weighing a document against a long tool
Big wrenches change the usual logic. A tool over five feet long costs time and care to ship to an outside lab and back. Therefore a plant that must show a record on arrival gains more from the chart code at this size than with a small wrench. For example, a shutdown team that starts work the week the tool lands has no window for a lab trip.
Still, the Snap-on TE1003FU dial wrench makes sense in other cases. A heavy-industry site may own a bench that reaches 1,000 ft-lb. Likewise, a contract lab nearby may already check your large tools on a fixed cycle. Then the base code avoids paying twice for the same record.
What ships with the Snap-on TE1003FU dial wrench
Snap-on marks this row with a note: the wrench includes a separately packed 92TQPA 4 ft tubular extension handle. So the crew gets the reach it needs without a second order. Snap-on prints the TE1003 Basic and the TE1003L light model beside it.
| Spec | TE1003FU |
|---|---|
| Square drive | 1 in |
| Dial | 1,000 ft-lb, 10 ft-lb marks (about 1,356 N·m) |
| Length | 66-13/16 in |
| Width | 3-9/16 in |
| Head depth, excluding drive | 2-1/32 in |
| Table | US Reading/Standard 2% Accuracy |
Ordering the Snap-on TE1003FU dial wrench
Lost in HCM brings this tool into Vietnam and quotes each request. Because shipping a tool this size takes planning, mention your site and timing too. Then ask Lost in HCM about the TE1003FU. For lighter sizes, scan the torque wrench pages, or contact SMK Vietnam. In service, never load the wrench past 1,000 ft-lb, and keep it off seized fasteners.
Heavy-tool buyer FAQ: TE1003FU
Is the extension handle extra on the TE1003FU?
No. Snap-on’s row says the 92TQPA 4 ft handle comes in a separate pack with the wrench.
Why pick the chart code for a big wrench?
Moving a long tool to an outside lab takes time. So a document on arrival can save a trip.
Can a 2-needle dial help on a large flange?
Yes. The follow-up needle stays at the peak, so the fitter can read it after the pull.
Reviews
There are no reviews yet.