Description
Many service jobs fall between small cover screws and heavy flange bolts. The Snap-on QE2R100 torque wrench targets that middle ground. It has a 3/8″ square drive and sets from 20 to 100 ft-lb. So one compact tool can handle brackets, covers, clamps and light machine joints.
What the Snap-on QE2R100 torque wrench does
This is an adjustable click-type wrench from the Snap-on QE micro family. You dial in the target, then pull with a smooth, steady hand. When the joint reaches your value, the tool gives a short click. At that moment you stop, so the bolt holds the load your spec calls for.
A 3/8″ drive also keeps the head slim. As a result, it reaches fasteners in tight panels where a 1/2″ head will not fit. In addition, most crews already own a full set of 3/8″ sockets.
Where a 20-100 ft-lb range fits
Lost in HCM lists the QE2R100 for oil and gas, power and renewable energy work. Typical jobs include:
- Cable lugs, clamps and cabinet frames in plants and substations.
- Pump covers and small flanges on process skids.
- Brackets and junction boxes on solar and wind sites.
- Gearbox covers and motor mounts during a planned shutdown.
How to choose between QE sizes
Start with the torque values on your work instructions. Then pick the model whose scale puts most of them near the middle, not at either end. If many values sit below the 20 ft-lb floor of the QE2R100, a smaller QE model gives finer control. For example, the 1/4″ QE1R200 reads in in-lb for delicate parts. On the other hand, if you often need more than 100 ft-lb, step up to the 1/2″ QE3R250.
Care tips for the QE2R100
A click wrench rewards gentle handling. After each job, turn the setting down to the lowest mark so the spring can rest. Also keep the tool in its case, away from dust and drops. Never use it to free a seized bolt, because a hard reverse load can upset the mechanism. Most plants send torque tools out for a calibration check on a fixed schedule, and again after any hard knock.
Order through Lost in HCM
Lost in HCM, our supply partner, prepares every quote for the Snap-on QE2R100 torque wrench. To check the price and lead time, request a quote from Lost in HCM. You can also compare other torque wrenches in our catalog, or contact SMK Vietnam for help with sizing. Product data for the whole range sits on the official Snap-on site.
Questions buyers ask about the QE2R100
Can I use the 3/8″ sockets I already own?
Yes. The wrench has a standard 3/8″ square drive, so it takes normal 3/8″ drive sockets.
What range does the Snap-on QE2R100 torque wrench cover?
It sets from 20 to 100 ft-lb. For values below 20 ft-lb, choose a smaller wrench that reads in in-lb.
Does SMK Vietnam ship the tool?
No. Lost in HCM supplies it and confirms price, stock and delivery once you send a quote request.
Reviews
There are no reviews yet.