Description
Small screws fail in quiet ways. A stripped thread in a plastic boss or a cracked PCB standoff may only show up at final test. The Snap-on QDRIVER3P torque screwdriver guards against that at the station itself. It is a preset driver with a cam-over clutch, and Snap-on lists its range as 1.5 to 15 in-lb, or 16 to 169 N·cm.
One station, one value
Preset drivers suit lines where each station has a single screw spec, such as one cover screw. The crib sets the QDRIVER3P once with a setting tool and confirms it on a tester. After that, the operator has nothing to adjust and nothing to read. So a busy line keeps the same torque from the first unit of the day to the last.
How the Snap-on QDRIVER3P torque screwdriver protects small parts
When the screw reaches the set torque, the cam-over clutch slips and the handle free-wheels. In other words, the operator cannot add more torque by pushing harder. Snap-on states ±6% accuracy in the clockwise direction. That makes the QDRIVER3P a good match for threads that do not forgive a heavy hand.
Typical stations for 1.5-15 in-lb
- Screws into plastic housings and covers.
- PCB mounting screws and standoffs.
- Small sensor, relay and connector screws.
- Control-wiring terminals in instruments and small panels.
The supplier also lists the Snap-on QDRIVER3P torque screwdriver for electrical, oil and gas and renewable energy work, where control terminals often fall in this band.
Build and handling
Snap-on gives the QDRIVER3P a red anodized aluminium body, a stainless steel shank and a tri-lobe grip. It also takes standard 1/4-inch hex bits with a magnetic hold, and it measures 5-5/8 inches long. Therefore it sits well in the hand during long runs of small screws.
Kitting a line with the Snap-on QDRIVER3P torque screwdriver
First, give each station its own driver and tag it with the value. Also keep a record of which serial number lives where. Then audit the drivers on a tester on a set schedule, and pull any tool that drifts. If a value sits above 15 in-lb, step up to the QDRIVER4P instead.
Quotes and supply
Lost in HCM supplies the QDRIVER3P, and SMK Vietnam lists it on their behalf. To price a set for your line, get a quote from Lost in HCM. You can also explore more torque screwdrivers, contact SMK Vietnam, or visit snapon.com.
QDRIVER3P FAQ for line leaders
What is 1.5-15 in-lb in metric?
Snap-on gives it as 16-169 N·cm, which is about 0.16-1.7 N·m.
Can operators change the setting?
Not without a setting tool. That is the point of a preset driver: the crib owns the value.
What happens at the set torque?
The cam-over clutch slips and the handle spins freely, so the screw gets no extra torque.
Reviews
There are no reviews yet.