Description
Excavator, forklift and generator manuals from Japan often give bolt torque in kgf·m. A mechanic with an N·m wrench must convert every line, often with dirty hands and a deadline. The Snap-on QD3RM30A torque wrench reads those values directly. It is a 1/2-inch drive click wrench with a fixed ratchet, and its listing gives a 6 to 30 kg·m scale.
Reading kg·m straight from the manual
Say the spec for a track roller bolt reads 18 kgf·m. With the Snap-on QD3RM30A torque wrench, the mechanic sets 18 and pulls. There is no need to multiply by 9.8 and round the result. As a result, the chance of a wrong setting drops, and the job sheet matches the manual line for line. The full span equals about 59 to 294 N·m.
Where the Snap-on QD3RM30A torque wrench works best
- Undercarriage, axle and wheel bolts on construction equipment.
- Engine mount and flywheel housing bolts on gensets.
- Forklift mast, axle and counterweight fasteners.
- Medium flange and bracket bolts in plant maintenance.
In each case, a 1/2-inch drive gives enough strength for the load, while the head stays small enough for tight spaces.
Click action with a fixed ratchet
The QD3RM30A breaks with a clear click at the chosen value, so the operator knows when to stop. In addition, the fixed ratchet head lets the socket stay on the bolt between strokes. Therefore long runs of fasteners go faster without losing control on the final pull.
About the A suffix
Snap-on’s UK torque brochure lists a QD3RM30 with a 1/2-inch drive and a 6-30 kg·m range, which agrees with this listing. Even so, that entry has no A suffix. So ask Lost in HCM to confirm the steps, length and head details of the QD3RM30A.
Keeping the Snap-on QD3RM30A torque wrench accurate
Return the setting to the bottom of the scale before storage, because a compressed spring loses tension. Also keep grit out of the ratchet and oil it lightly, as Snap-on recommends. Never use the wrench as a breaker bar. Then send it for calibration on a fixed cycle, and sooner after a drop.
Get a quote
SMK Vietnam lists the QD3RM30A for our partner Lost in HCM, who supplies it and prepares quotes. To ask for a price, contact Lost in HCM for a quote. You can also compare torque wrenches, contact SMK Vietnam, or visit snapon.com.
QD3RM30A FAQ for maintenance teams
How do I convert kg·m to N·m?
Multiply by about 9.81. So 6-30 kg·m works out to roughly 59-294 N·m.
Is a 1/2-inch drive strong enough for 30 kg·m?
Yes. Snap-on lists this range on a 1/2-inch drive, so standard 1/2-inch sockets fit the job.
Who confirms stock and delivery?
Lost in HCM does. Send the quote form, and their team replies with stock, price and timing.
Reviews
There are no reviews yet.