Snap-on QD2IN100A Torque Wrench Body, Adjustable Dual Scale, 20-100 N·m, J Shank Interchangeable Head

Description

Twice the capacity of the QD2IN50A, in a body of the same 14-1/2 in length. That sums up the Snap-on QD2IN100A torque wrench body. It sets from 20 to 100 N·m, reads in ft-lb as well, and takes J-shank interchangeable heads. However, the head you fit can set a lower ceiling than the body, and that matters most near the top of the scale.

QD2IN100A body and head: two ratings to respect

Every head in Snap-on’s interchangeable range carries its own maximum working torque. For instance, the catalog lists 60 ft-lb for its J-shank box-end heads. That is about 81 N·m, which sits below the 100 N·m top of the QD2IN100A. So if a joint needs 90 N·m, a J box-end head is the wrong choice. Instead, pick a head whose rating clears the target, and check that rating in Snap-on’s catalog first.

Snap-on QD2IN100A torque wrench body at a glance

Lost in HCM lists it as an adjustable dual-scale body rated at ±4%. Meanwhile, the scale and shank figures above come from Snap-on’s CAT1500i catalog.

Line fittings and other jobs for the QD2IN100A

A body with heads earns its place where a socket cannot reach. Typical work includes:

• Brake and fuel line nuts, using a flare nut head that grips more flats.
• Hydraulic hose ends on forklifts and small loaders.
• Refrigerant fittings on chillers and air dryers.
• Bolts behind brackets, where a 10° offset box-end head clears the edge.

Flare nut heads also need care with length. Snap-on’s ratcheting flare nut heads sit 3.50 in from pin to fastener on the J shank, while standard J heads sit at 2.50 in. Therefore, follow Snap-on’s head-length instructions when you use one.

Why not a preset body?

A preset body holds one value, which suits a fixed station. Service crews, however, meet a new spec on almost every machine. The adjustable QD2IN100A lets them dial each figure on the scale instead.

Get a quote for the Snap-on QD2IN100A torque wrench body

Supply and pricing for the QD2IN100A sit with Lost in HCM, and this SMK Vietnam page is a listing only. Per Snap-on’s catalog, bodies in this dual-range line come with a certificate of calibration and a molded case. Your quote should still confirm what ships. Next, send your head list to Lost in HCM for a quote, together with your target values. You may also want to compare our other torque wrenches, check snapon.com, or reach SMK Vietnam.

Buyer questions on the QD2IN100A

What is 100 N·m in ft-lb?

It is about 74 ft-lb. Note that Snap-on lists the ft-lb scale on this body from 16.6 to 71.9 ft-lb.

Does the QD2IN100A share heads with the QD2IN50A?

Both bodies use the J shank, so a J head fits either one. Still, check the head’s own rating against your target.

Who sets the price and lead time?

Lost in HCM does. SMK Vietnam lists the product but does not stock or ship it.