Description
Airport ground support equipment works hard and lives outdoors. Tugs, belt loaders, stairs and power units shake their hardware loose over thousands of cycles. The Snap-on QD21000A torque wrench helps GSE shops put that hardware back to spec. It has a 3/8″ square drive in a fixed head, and its click mechanism sets from 200 to 1,000 in-lb.
Why a fixed head suits GSE maintenance
A fixed head has no ratchet, so it does one job: the final pull. As a result, techs run the fastener down with a speed tool, then switch to the QD21000A for the click. Some shops prefer this split, because it stops anyone from spinning bolts in with the torque wrench itself. The simpler head also has fewer moving parts to collect grit from the apron.
GSE jobs for the Snap-on QD21000A torque wrench
The tasks below often fit, as long as the manual value sits between 200 and 1,000 in-lb:
- Bracket and mount bolts on baggage tractors and tugs.
- Hydraulic pump and valve block fasteners on loaders and lifts.
- Roller and frame hardware on belt loaders after a repair.
- Panel and accessory bolts on ground power units.
Always confirm the maker’s figure, since GSE fleets mix brands from many countries.
Turning ft-lb and N·m into in-lb
GSE manuals mix units. A US tug may list ft-lb, while a European loader lists N·m. For ft-lb, multiply by 12, so 50 ft-lb becomes 600 in-lb. For N·m, divide by 0.113, so 80 N·m becomes about 708 in-lb. Either way, write the converted value on the work card before you set the Snap-on QD21000A torque wrench.
Apron-proof care
Jet blast, rain and dust all hit tools on a ramp. Therefore, keep the QD21000A in its case whenever it leaves the hangar. Wipe it dry after rain, and never leave it on a hot tug seat. Wind it to 200 in-lb at the end of a shift. Finally, track each wrench by serial number, because most aviation quality systems expect tool traceability.
How to order the Snap-on QD21000A torque wrench
SMK Vietnam lists this tool, while our partner Lost in HCM supplies it and quotes each order. Simply request a quote from Lost in HCM and include your site and quantity. You can also review other torque wrenches or contact SMK Vietnam for help.
GSE shop FAQ
Does the QD21000A have a ratchet?
No. The QD21000A uses a fixed drive head. For a ratchet model with the same 200-1,000 in-lb span, ask Lost in HCM about the GQT2R1000NP.
What sockets fit the QD21000A?
Any standard 3/8″ square drive socket, extension or adapter fits the QD21000A.
Does SMK Vietnam deliver the QD21000A to the airport?
No. SMK Vietnam lists the QD21000A, and Lost in HCM confirms supply, price and delivery in its quote.
Reviews
There are no reviews yet.