Description
Heavy joints on a production line need the same torque every cycle, not just the first few. The Snap-on QC3P200 torque wrench body serves that kind of station. It is a preset QC series body that holds one value between 40 and 200 ft-lb, and it accepts interchangeable heads.
Snap-on QC3P200 torque wrench body: the numbers
| Type | Preset |
|---|---|
| Range | 40-200 ft-lb (55-270 N·m) |
| Shank | Y (0.560 in), per CAT1500i |
| Length | 23 in |
| Accuracy | ±4% clockwise, ±6% counterclockwise, 20-100% of full scale |
| Calibration certificate | None on preset bodies, per Snap-on |
Because the range starts at 40 ft-lb, or 20% of full scale, every setting falls inside Snap-on’s accuracy statement. Snap-on’s CAT1500i catalog lists a Y shank for this body, so check the shank letter on your heads before you order them.
Preset or adjustable for a heavy QC3P200 station?
An adjustable body lets anyone dial a new value on its scale. That flexibility helps in a workshop, yet on a line it adds the risk of a wrong setting. A preset body such as the QC3P200 stays dedicated to one value instead. As a result, operators only need to seat the head and pull to the click.
Setting the value
Your tool crib or calibration lab sets the body on a torque tester, following Snap-on’s procedure. Then tag it with its value and station, so it goes back to the right place after each shift.
Head choices for QC3P200 line work
Pick heads that match both the joint and the shank letter. For example:
- Ratcheting square drive heads speed up runs of the same bolt.
- Fixed square drive heads work with crowfoot wrenches near brackets.
- Open-end heads, meanwhile, reach nuts on hydraulic tubes.
Also check each head’s maximum working torque against your set value, because Snap-on rates heads one by one. Standard Y heads sit 3.00 in from pin to fastener. For any head with a different spacing, follow Snap-on’s head-length instructions.
Jobs for the QC3P200
- Engine and transmission mount bolts on vehicle lines.
- Axle and suspension hardware on truck and bus assembly.
- Frame and bracket bolts on farm and construction machines.
Request a Snap-on QC3P200 torque wrench body quote
Our partner Lost in HCM sources the QC3P200 and prices it, whereas SMK Vietnam provides the listing. Because Snap-on does not include a certificate with preset bodies, book a check before the body reaches the line. To begin, share your set value and heads with Lost in HCM for a quote. In addition, you can compare torque wrenches in our catalog, visit snapon.com, or contact SMK Vietnam.
QC3P200 buyer FAQ
What is the QC3P200 range in N·m?
The catalog gives 55 to 270 N·m for this body.
Does the QC3P200 work counterclockwise?
Yes. Snap-on rates QC series bodies at ±6% counterclockwise and ±4% clockwise.
Why is there no certificate?
Preset bodies ship without one, according to Snap-on’s catalog. Your lab can check the body once it holds your set value.
Reviews
There are no reviews yet.