Description
Air conditioning and chiller work is full of small fasteners that leak, strip or crack when a tech guesses the torque. The Snap-on GQT2R200NP torque wrench takes the guessing out of that work. It pairs a 3/8″ square drive with a fixed ratchet head, and its adjustable click mechanism sets from 40 to 200 in-lb.
Low torque, high stakes in HVAC service
Small HVAC parts punish overtightening. For example, a valve cap, a sensor fitting or a fan hub screw can strip with only a little extra force. On the other hand, a loose part rattles, leaks or works free after a few heat cycles. So a light-range click wrench such as the GQT2R200NP gives the tech a clear stop at the right point. In addition, the ratchet head lets them turn a fastener in a cramped cabinet without lifting the tool off.
HVAC tasks that suit the Snap-on GQT2R200NP torque wrench
- Fan blade and blower wheel hub screws in air handling units.
- Motor mount and bracket screws on condensing units.
- Terminal box covers and panel screws on outdoor units.
- Valve caps and sensor fittings, where the maker lists an in-lb value.
Check each value against the unit manual before you start, because specs differ between brands and models.
How to set the GQT2R200NP from a metric manual
Many HVAC manuals from Japanese and Korean brands give torque in N·m. To set the GQT2R200NP, divide the N·m figure by 0.113. Thus 10 N·m is about 89 in-lb, and 18 N·m is about 159 in-lb. The scale bottom of 40 in-lb equals roughly 4.5 N·m, so lighter specs need a torque screwdriver. Likewise, anything over about 22.6 N·m calls for a wrench with a higher range.
Working in tight cabinets
First, set the value and read it back once before you pull. Next, seat the socket fully, then place your hand on the grip rather than the shaft. Pull with a smooth, even motion and stop at the first click. With the ratchet on the Snap-on GQT2R200NP torque wrench, short swings work when a pipe blocks a full arc.
Keeping the GQT2R200NP ready for the next call
Service vans get hot in the Vietnamese sun, and fine dust finds its way into every drawer. Therefore, store the wrench in its case and keep it off the dashboard. Wind it down to 40 in-lb after each job. Then note its serial number on your service sheets, so you can show a customer which tool torqued their unit.
Order through Lost in HCM
SMK Vietnam lists the GQT2R200NP, while our partner Lost in HCM handles supply and prices. To get a figure for your team, request a quote from Lost in HCM. You can also browse more torque wrenches or contact SMK Vietnam if you have a question.
HVAC buyer questions
Does the Snap-on GQT2R200NP torque wrench have a ratchet?
Yes. The GQT2R200NP has a fixed ratchet head on a 3/8″ square drive.
What is the lowest setting on the GQT2R200NP?
The GQT2R200NP starts at 40 in-lb and sets up to 200 in-lb.
Will the GQT2R200NP cover refrigerant flare nuts?
Check the line set maker’s value first. Convert it to in-lb, and if it tops 200 in-lb, choose a larger range than the GQT2R200NP.
Reviews
There are no reviews yet.