Snap-on CTLNK2Y100 Torque Wrench, ControlTech Link Y-Shank Interchangeable Head Digital, 5-100 ft-lb

Description

On an assembly line, the costly mistake is often a skipped bolt rather than a wrong value. The Snap-on CTLNK2Y100 torque wrench helps prevent both. This ControlTech Link wrench covers 5 to 100 ft-lb, guides the operator through a sequence, and logs each result. It also takes Y-shank interchangeable heads.

How Link guides the operator

First, Snap-on fits these wrenches with dual-side LED lights that you can configure. As the pull nears the target, the lights, beep and handle vibration warn the operator. Meanwhile, sequence programming walks the user through each joint in order. Then each result lands in the time-stamped data trail.

In addition, with Snap-on’s CTLNKCTRL controller, the wrench links wirelessly to plant systems. In that setup, several operators can work under one real-time process control. Without MES, the controller can still act as a standalone data collection or control system.

Snap-on CTLNK2Y100 torque wrench specifications

• Shank: Y, 0.560 inch.
• Range: 5-100 ft-lb, 60-1,200 in-lb, 6.8-135.6 N·m.
• Usable range: 5% to 100% of rated capacity.
• Accuracy from 20% to 100%: ±2% CW, ±3% CCW.
• Accuracy from 5% to 19%: ±4% CW, ±6% CCW.
• Memory: up to 1,500 readings.

Y heads and the other shanks

Snap-on groups its heads by shank: J is 0.425 inch, Y is 0.560, X is 0.735 and Z is 0.990. This model, however, accepts Y only. Also, a standard Y head sets the fastener 3.00 inches out from the retaining pin. Snap-on sells heads one by one, so order open-end, flare-nut or ratchet heads to match your stations.

Line jobs for the Snap-on CTLNK2Y100 torque wrench

• Seat, belt and trim bolts in vehicle assembly.
• Brake and fuel line fittings, with a flare-nut head.
• Motorcycle engine and frame hardware.
• Appliance and HVAC unit assembly.

For tight tolerance, keep targets at 20 ft-lb or above, since that marks 20% of capacity.

Request a quote

Lost in HCM supplies this wrench and prepares pricing, and SMK Vietnam lists it for them. First, list your heads, and say whether you need a controller. After that, send your CTLNK2Y100 request to Lost in HCM. Browse more torque wrenches, message SMK Vietnam, or visit snapon.com for the brand.

What line managers ask

Is this the same range as the TECH2Y100?

Yes, both cover 5 to 100 ft-lb on a Y shank. However, the Link model adds sequences, a data trail and the controller link.

Can it read below 5 ft-lb?

Snap-on rates the usable range from 5% of capacity, which is 5 ft-lb here.

Does the controller come with the wrench?

The catalog lists it under its own part number, CTLNKCTRL. So ask Lost in HCM to add it if you need it.