Description
A week-long run in a thermal chamber needs a logger that never loses its place. The Keysight DAQ970A data acquisition system fits that job with three slots, a 6.5-digit DMM and nonvolatile memory. Lost in HCM lists it for rental and sale, so you can book it for one campaign or keep it for routine logging.
Built for long logging runs
Nonvolatile memory holds 100,000 readings, so a power loss does not erase them. Auto-calibration compensates for drift caused by time and temperature. BenchVue software and browser control simplify setup, logging and data export. As a result, an engineer can start a scan from a laptop and check it later.
Keysight DAQ970A data acquisition system figures
| Item | Value |
|---|---|
| Module slots | 3 |
| Internal DMM | 6.5 digits / 22 bits |
| Maximum scan rate | 450 channels/s with the DAQM900A |
| Digitizer option | 4 channels, 24 bit, up to 800 kSa/s |
| Nonvolatile memory | 100,000 readings |
| Interfaces | USB and LAN/LXI |
Installed options can change the capability of a delivered unit, so the quote takes precedence.
Modules and signal types
Ten switch and control modules give flexible channel setups. Built-in signal conditioning then measures temperature, voltage, current and resistance. Therefore one frame can log temperature and supply rails in the same scan. The digitizer option adds fast sampling when a signal changes too quickly for scanning.
Planning a data acquisition system run
Decide how many points you log and how often. Then match the modules to your sensors. If you need a very fast signal, ask about the digitizer option. The Keysight DAQ970A data acquisition system is small enough for a bench, yet it holds a lot of channels once the modules are in. Also plan the cabling and terminal blocks, since they decide how neat the wiring looks.
Where teams use it
Environmental and thermal chamber logging is the most common job. Battery and power-device characterization also uses the multi-channel scan. Production lines run it for multi-channel test, and sensor validation and structural monitoring need the same long records. When you are ready, request a quote from Lost in HCM. Browse the data acquisition category, read the Keysight website or contact SMK Vietnam.
DAQ970A questions
How quickly can it scan?
It scans up to 450 channels per second when you use the DAQM900A.
Does it offer a fast digitizer?
Yes, as an option with 4 channels, 24 bit and up to 800 kSa/s.
How do I connect it?
It lists USB and LAN/LXI, and BenchVue or a web browser can control it.
Reviews
There are no reviews yet.