Description
Electric vehicle plants face strict rules on how tight each structural bolt must be. The Snap-on VERSA3S250A torque sensor helps a team show that proof. It is a 1/2-inch drive sensor for the Versatorq 2 system, with a 25 to 250 ft-lb range. So it covers many pack, frame and motor mount bolts.
Why EV battery lines log torque
A loose pack mount can rattle, wear or let in water over time. Therefore many EV makers ask suppliers to keep a value for each critical bolt. With the VERSA3S250A in the drive chain, a technician sees the true load as it builds. Then the Versatorq 2 meter stores that reading for the shift report.
What happens inside the drive chain
Think of the VERSA3S250A as a short, smart extension. It fits between a ratchet or breaker bar and the socket, so it feels the same twist the joint does. Meanwhile, a coiled cord sends the signal to the meter. Track mode follows the load in real time, while Peak mode keeps the top figure. Snap-on lists sockets, extensions and universal joints as fair partners in that chain.
Snap-on VERSA3S250A torque sensor specifications
- Square drive: 1/2 inch.
- Range: 25 to 250 ft-lb.
- Accuracy: ±1% of reading across 10-100% of the sensor range.
- Body: 1.4 inch diameter and 2.6 inch length.
- Cable: 48 inch heavy-duty coiled cord.
Picking between neighbor sizes
Below this unit sits the 3/8-inch VERSA2S100A for 10-100 ft-lb. Above it, the 3/4-inch VERSA4S600A starts at 60 ft-lb. So the VERSA3S250A fits best when most targets fall between about 50 and 200 ft-lb. If your drawings span both ends, consider two sensors on one meter.
Tips for a clean data trail
Give each VERSA3S250A an asset number, and note it beside the readings. Also download the meter memory before it fills. Snap-on says the meter exports over mini USB with no client software. Finally, plan periodic calibration with an outside lab so the trail stays credible. On top of that, ask Lost in HCM to confirm use with any power tool before you try it.
Buying the Snap-on VERSA3S250A torque sensor
Lost in HCM supplies this sensor in Vietnam, and SMK Vietnam lists it as a partner product. For price, stock and meter bundles, request a quote from Lost in HCM. You can also see the full torque testers and calibration systems range or contact SMK Vietnam. Snap-on publishes its tools at snapon.com.
Questions from EV line engineers
What range does the VERSA3S250A cover?
It reads 25 to 250 ft-lb on a 1/2-inch square drive.
Will an older Versatorq sensor work with the same meter?
Snap-on says original sensors without the A suffix work with the Versatorq 2 meter, but they need calibration first.
Can the meter work near flammable materials?
Snap-on describes the Versatorq 2 meter as intrinsically safe with ATEX and UL approval. Still, check your zone rules with Lost in HCM.
Reviews
There are no reviews yet.