Snap-on TER175L Torqometer, US/N·m Light Signal Dial Wrench, 1/2″ Drive, 230 N·m / 175 ft-lb

Description

One letter on a purchase order can change what arrives. This listing is the plain Snap-on TER175L Torqometer, titled “U.S./ New. Met. Light Signal – TER175L” at Lost in HCM. If you need a document in the box, order the TER175LC, the certificate version of this signal wrench, instead. Mechanically, the two codes match.

A code map for the TER175 row

CAT1500i prints one row for three TER175 models. Then a note under the table adds the suffix rule. Without a C, a chart wrench includes no certificate of calibration.

When the plain Snap-on TER175L Torqometer is enough

Pick the plain code when your team can test the wrench before first use. For instance, a plant with a 1/2 inch torque tester can log its own result quickly. Likewise, a spare for a maintenance crib rarely needs a factory document. By contrast, choose the TER175LC when an audit or a receiving rule demands a record on arrival.

TER175L dimensions and scales

• Drive: 1/2 in square.
• Dial: up to 230 N·m (10 N·m marks) and 175 ft-lb (5 ft-lb marks).
• Body: 18-3/4 in long and 2-3/4 in wide; head depth 1-3/8 in before the drive.
• Case code: PBR5.
• Table: Combination US/Newton Meter Reading/Precise 1% Accuracy.

On the Snap-on TER175L Torqometer, a built-in light flashes when the wrench hits the targeted torque, as CAT1500i describes it. As a result, the operator gets a clear signal and can still read the value on the dial. In addition, keep loads under the rating, and do not use the TER175L to break fasteners loose.

Writing the TER175L purchase order

Copy the code exactly as TER175L, and add the drive and range in the description line. That way, a reviewer spots a missing or extra letter at once. Lost in HCM supplies the wrench in Vietnam and prepares each quote. So, once the order is ready, send the TER175L order to Lost in HCM for pricing. Meanwhile, our torque wrench pages list other sizes, and you can reach SMK Vietnam here.

Purchase-order questions about the TER175L

Which TER175 code should a spare be?

Usually the same type as your main tool, so operators see the same cue. A plain TER175L spare also keeps the cost down.

Does the TER175L dial show two units?

Yes. The CAT1500i row gives a newton meter scale and a foot-pound scale.

Does the lamp change the certificate rule?

No. The C suffix rule covers the signal models too, so the TER175L ships without a certificate.