Description
The Snap-on TEC352FUA dial wrench is the plain Follow-up code, listed with no chart and no certificate. If your audit plan wants extra documents, see the TEC352FUAC Follow-up with Chart. Both codes share one CAT1500i row, from the drive to the two needles.
Why the TEC352FUA costs less than its twin
To begin with, Snap-on notes that wrenches in its Torqometer charts ship without a certificate of calibration. A C at the end of the stock number adds one. So the Snap-on TEC352FUA dial wrench leaves the first check to you. In practice, that trade works well when your own lab, or a contracted one, already tests new tools.
Pump stations and power plant outages
Water utilities and power plants open pumps, valves and couplings during planned outages. Here, the Snap-on TEC352FUA dial wrench lets a supervisor confirm the result after each pull. Because the TEC352FUA reads ft-lb and kg·m, it also matches mixed US and Asian equipment manuals. Therefore, for these teams, the plain code is often enough.
When to take the TEC352FUAC
Take the chart code when the plant owner audits tools at the gate. Also take it when your outage starts before a lab slot opens.
Snap-on TEC352FUA dial wrench catalog data
- 3/4 inch square drive
- Metric scale to 50 kg·m, 1 kg·m marks
- US scale to 350 ft-lb, 10 ft-lb marks
- 29-7/8 in long, 3-1/4 in wide
- 1-25/32 in head depth, drive excluded
- PB39 case
Snap-on also groups it in the Combination US/Metric Reading, Standard 2% Accuracy table. Its UK brochure applies that band from 20% of full scale to full scale, both ways. Thus, for the TEC352FUA, the band begins at 70 ft-lb or 10 kg·m.
Using the Snap-on TEC352FUA dial wrench well
Snap-on explains that one needle shows the targeted torque, while the other shows the torque achieved. Set your mark, then pull with a steady, even force. Avoid shock loads, and never use the wrench to break a bolt loose. Afterwards, store it in its case to protect the dial.
Ordering the TEC352FUA
Lost in HCM supplies the TEC352FUA to sites across Vietnam and quotes each request. Request a quote from Lost in HCM with the plain code. Then compare other torque wrenches, or contact SMK Vietnam if you are unsure of the range.
Outage crew FAQ on the TEC352FUA
Does the TEC352FUA read N·m?
No. The scales show ft-lb and kg·m. For N·m, multiply the kg·m figure by roughly 9.8.
Is a single-needle model offered?
Yes. Besides the TEC352FUA, the same row lists the TEC352A Basic and the TEC352LA signal model.
Can we test it ourselves on arrival?
Yes, if your lab has a tester that covers the TEC352FUA range. It can then write its own record for the wrench.
Reviews
There are no reviews yet.