Snap-on TE250LC Torqometer, U.S. Light Signal Dial Torque Wrench, 1/2″ Drive, 250 ft-lb, with Chart

Description

Rice mills across the Mekong Delta run hullers, whiteners, polishers and bucket elevators through two or three harvests a year. Because harvests overlap, the lines barely stop during peak weeks. The Snap-on TE250LC Torqometer helps mill fitters tighten heavy bolts in that loud, dusty setting. A lamp on the head flashes at the target, so the eye does not have to stay on the needle.

Noise, husk dust and a lamp

A rice mill roars, and husk dust hangs in the air. In those conditions, a fitter can miss a needle or a soft click. However, a flash of light is hard to miss, even in the corner of the eye. So the TE250LC lets the user watch the socket and the bolt while the lamp signals the stop.

TE250L row in catalog CAT1500i

Snap-on prints this row in its US Reading/Standard 2% Accuracy table. The catalog adds that a C at the end of the stock number orders the certificate of calibration version. Lost in HCM’s title calls the TE250LC the with Chart version, so check the papers when you ask for a quote.

Mill jobs for the Snap-on TE250LC Torqometer

• Base and bearing bolts on hullers and whitening machines.
• Head and boot pulley bolts on bucket elevators.
• Gearbox and motor mount bolts on screw conveyors.
• Frame and hopper bolts on silos and dryers.

First, lock out every machine before work starts. Then use the values in the maker’s manual.

Band and conversion

Lost in HCM files the TE250LC under US Reading/Standard 2% Accuracy. Snap-on’s standard grade holds within 2% of reading from 20% of full scale up. That puts the low end of the band at 50 ft-lb. Also, 250 ft-lb works out to roughly 339 N·m, which helps with metric manuals.

Care in a dusty mill

Husk dust gets into every gap, so brush the TE250LC clean and wipe the dial lens after each round. Then return the wrench to its PB8A case. Never use the Torqometer to break a rusted bolt loose. In addition, plan recalibration with an outside lab after each busy season.

Order the Snap-on TE250LC Torqometer

Millers and grain traders can buy the Snap-on TE250LC Torqometer from Lost in HCM, the SMK Vietnam partner. Ahead of the next harvest, request a quote from Lost in HCM. For lighter or heavier dials, see our torque wrenches. Brand news sits at snapon.com, or you can contact SMK Vietnam.

Rice mill FAQ

Why pick the TE250LC light signal model for a mill?

Mills are loud and dusty, so sound cues often fail. A flashing lamp is easier to notice than a needle or a faint click.

Can I use it on small cover screws?

Not well. Its band starts near 50 ft-lb, so use a smaller dial for light fixings.

What comes with the with Chart version?

Lost in HCM’s title gives no detail. Ask Lost in HCM before you place the order.