Description
Giant observation wheels now turn above resort parks in Da Nang, Ha Long and other tourist cities. Wind and steady rotation load every hub, spoke and rim joint. So ride crews retorque key bolts on a fixed plan, often after the last guests leave. The Snap-on TE2003L Torqometer suits that work, with a 2,000 ft-lb dial and a lamp that flashes at the target.
Wheel joints for the Snap-on TE2003L Torqometer
- Drive unit frames for the motors and gearboxes that turn the rim.
- Bearing housing bolts on the main hub and axle.
- Leg and A-frame base bolts at the foundation.
- Cabin hanger brackets, where the maker lists an ft-lb value.
However, each ride maker writes its own torque table, and some large joints call for hydraulic tensioners instead. So begin with the maker’s manual. Then use the TE2003L only where the listed value fits its dial.
Why a flashing lamp helps on the night shift
Night work means flood lights, long shadows and dials seen at odd angles. In addition, a fitter on a platform must watch the harness, the handle and the bolt at once. The TE2003L takes one task away, because its lamp flashes when the targeted torque arrives. Meanwhile, the needle still shows the reading for the ride log.
TE2003L figures from the Snap-on catalog
| Item | TE2003L (CAT1500i p.333) |
|---|---|
| Square drive | 1 in |
| Range | 2,000 ft-lb (about 2,710 N·m) |
| Increments | 25 ft-lb |
| Length | 80 in |
| Width / head depth | 4-13/32 in / 2-1/8 in |
| Extension handle | 93TQPA 5 ft tubular, packed separately |
The Snap-on TE2003L Torqometer row sits on page 333 of catalog CAT1500i, in the US Reading/Standard 2% Accuracy table. The same page notes that wrenches in that chart ship without a certificate of calibration. Per the catalog, a C added to the stock number orders the certificate version, so TE2003LC would be that form.
Read the 2% band before you choose
Lost in HCM files this wrench under US Reading/Standard 2% Accuracy. Snap-on’s grade holds within 2% of the reading across the top 80% of the scale, turning either way. On the TE2003L, the band therefore opens at 400 ft-lb. For cabin trim and light covers, pick a smaller dial.
Handling an 80 inch wrench aloft
An 80 inch body plus a 5 foot handle needs a clear swing path. First, tie the wrench and the handle to lanyards whenever you work above the ground. Next, pull in one smooth stroke and stop as soon as the lamp flashes. Also, never use the TE2003L to break bolts loose, and stay within its rated torque. Snap-on rates the Torqometer line for 0 to 100 °F. Finally, fit outside-lab recalibration into the ride’s inspection calendar.
Order the Snap-on TE2003L Torqometer
Ride operators, park engineers and service contractors can source the Snap-on TE2003L Torqometer from Lost in HCM, the SMK Vietnam partner. Before your next shutdown window, request a quote from Lost in HCM. See also our torque wrenches and snapon.com, or contact SMK Vietnam.
Observation wheel FAQ for the TE2003L
Does the TE2003L keep a second needle for the reading?
No. Snap-on describes the signal model by its flashing lamp. For a second needle that marks torque achieved, see the follow-up TE2003FU.
Does the 5 foot handle come with the TE2003L?
Snap-on’s row says the 93TQPA tubular handle ships packed on its own. Lost in HCM can confirm what the box holds.
What is 2,000 ft-lb in N·m?
About 2,710 N·m. The dial reads U.S. units, so convert metric values first.
Reviews
There are no reviews yet.