Description
Medical device and lab instrument plants often file a record for every gauge before it touches a product. For that kind of buyer, Lost in HCM offers the Snap-on TE12AC Torqometer, listed as “U.S. Basic (with Chart)”. Its plain twin is the TE12A Basic dial without a chart, which shares the frame and scale.
TE12AC paperwork against the plain TE12A
Snap-on prints one TE12 row in CAT1500i for both codes. Above it, a note explains that the C suffix marks the certificate of calibration models. So the TE12AC adds documents, not a different dial. Lost in HCM calls the extra item a chart, yet its listing does not describe it. Therefore ask them for a sample before you order.
Records-first sites that suit the Snap-on TE12AC Torqometer
- Device makers whose quality system logs each measuring tool at receipt.
- Suppliers facing a customer audit before the lab can fit in a check.
- Clean-room teams that try to keep tool trips outside to a minimum.
- New lines where the wrench must work from the first shift.
When the TE12A saves money
A plant with its own torque bench can verify a new wrench in minutes. For that team, the chart adds cost but little value. Likewise, a backup dial for engineering trials may only need a quick cross-check. Then the plain TE12A makes the sensible pick.
Dial and frame data for the TE12AC
The shared catalog row gives a 3/8 inch drive and a 150 in-lb scale with 2-1/2 in-lb marks. Length reaches 9-29/32 inches, width 2-11/16 inches and head depth 1-1/4 inches, with a PB9 case. As a Basic model, it shows the torque achieved on a single needle. Snap-on’s UK brochure rates Torqometer readings within 2% from 20% of full scale, so plan TE12AC work between 30 and 150 in-lb.
Light joints and steady pulls
Plastic housings, sensor brackets and small pump heads can crack or creep when you overshoot. So pull the Snap-on TE12AC Torqometer slowly, and stop as the needle meets the value. Also keep the dial face clean, and never use the wrench to loosen a stuck screw.
Placing an order for the Snap-on TE12AC Torqometer
Lost in HCM supplies this tool in Vietnam and writes every quote for SMK Vietnam buyers. Write the full TE12AC code on your request, so the chart version ships. Next, request a quote from Lost in HCM and list your quantity. You can also compare frames among our torque wrenches, read brand details on snapon.com, or contact SMK Vietnam.
Medical device buyer questions
Does the chart version measure any differently?
No. Both codes share one catalog row, so the TE12AC dial and drive match the TE12A.
Can we get a light signal frame instead?
Yes. The TE12LA in the same row flashes a lamp at the targeted torque.
What does the 150 in-lb top mark equal in N·m?
About 17 N·m, which also equals 12.5 ft-lb.
Reviews
There are no reviews yet.