Description
A half-inch square drive opens up a large stock of sockets, extensions and crowfoot wrenches. The Snap-on QYD16SL ratcheting head adds that drive to a Y-shank torque wrench body. Thanks to the ratchet, you can run a nut down without lifting the tool off the joint. It is the longer sibling of the QYD16A.
QYD16SL versus QYD16A
| QYD16SL | QYD16A | |
|---|---|---|
| Drive | 1/2 in, ratcheting | 1/2 in, ratcheting |
| Shank | Y (0.560 in) | Y (0.560 in) |
| Head O.D. / depth | 1-5/8 in / 3/4 in | 1-5/8 in / 3/4 in |
| Pin to fastener | 4.43 in | 3.00 in |
| Service kit | RKRS80A | RKRS936 |
In short, the two heads share drive and head size, while the QYD16SL places the fastener further from the pin.
Y-shank bodies for the Snap-on QYD16SL ratcheting head
Snap-on’s Y bodies include the QD3IN200B dual-range body at 40-200 N·m, plus the QC3P150 and QC3P200 preset bodies. The CTECH2Y100A ControlTech wrench also uses a Y shank. According to Snap-on, its standard heads keep a consistent pin-to-fastener size, so they need no adjustment. The QYD16SL, however, sits outside that 3.00 in standard. Therefore, confirm the right setting with Lost in HCM before you torque production parts.
Where the extra reach helps
Think of a flange bolt behind a guard, or a nut deep inside a frame rail. In spots like these, a longer head can keep the body and your hand clear of the obstruction. In open areas, on the other hand, the QYD16A keeps the setup simpler.
Keeping the QYD16SL ratchet healthy
For the Snap-on QYD16SL ratcheting head, Snap-on names the RKRS80A ratchet service kit. Rebuild the ratchet when it skips or binds, and clean the square drive often. Also, never use the head to break seized nuts loose, since Snap-on warns against that with torque tools.
Get a quote for the Snap-on QYD16SL ratcheting head
Lost in HCM supplies the QYD16SL and quotes it directly. SMK Vietnam lists it for them and holds no stock. Mention your Y-shank body, so they can check the match. After that, request QYD16SL pricing from Lost in HCM. You may also browse torque wrench heads and adaptors or contact SMK Vietnam.
QYD16SL questions
Does the QYD16SL fit a J-shank body?
No. It needs a Y shank. For J bodies, Snap-on lists the QJD16SL with the same 1/2 in drive.
Which service kit matches this head?
Snap-on lists the RKRS80A ratchet service kit for the QYD16SL. The standard QYD16A takes the RKRS936 instead.
What attachments can I drive with it?
Snap-on describes its square drive heads as a way to use sockets, crowfoot wrenches and similar attachments. This one takes 1/2 in drive parts.
Reviews
There are no reviews yet.