Description
A tire pressure sensor sits inside the wheel, held by a small nut or screw on its valve. Too little torque lets air seep out. Too much can crack the sensor or the valve stem. The Snap-on QDTPMS35 TPMS screwdriver avoids both, because it only offers the values these sensors commonly need.
Three settings, no guesswork
Snap-on lists dedicated torque settings of 4, 12 and 35 in-lb on the QDTPMS35. In other words, the technician picks one of three marked values instead of dialing a full scale. That keeps setup quick when a shop handles several sensor brands in one day. Still, always check the sensor maker’s torque value before you choose a setting.
Snap-on QDTPMS35 TPMS screwdriver specifications
| Item | QDTPMS35 |
|---|---|
| Type | TPMS adjustable torque screwdriver |
| Dedicated settings | 4 in-lb, 12 in-lb, 35 in-lb |
| Length | 6-5/8 in |
| Accuracy | ±6% |
| Material | Aircraft-grade aluminum |
For reference, 35 in-lb equals about 4 N·m, so this is a light-duty tool. Snap-on describes it as a highly accurate tool for maintaining or installing popular styles of TPMS sensors.
Where tire teams use it
- Tire shops that fit or replace sensors when they change tires.
- Fleet workshops that service cars, vans and light trucks.
- Dealer service bays that swap sensors under a recall or repair.
- Wheel and tire assembly lines that install sensors before balancing.
Good practice on sensor fasteners
Clean the valve hole and seat before fitting a new sensor. Then thread the nut by hand, so it starts square. Next, use the QDTPMS35 for the final turn only. Many sensor makers also supply new nuts, grommets and cores in service kits. So replace those parts rather than reusing old ones.
Keep the driver honest
A light torque tool can drift after a drop on a shop floor. Therefore check the Snap-on QDTPMS35 TPMS screwdriver on a tester at fixed intervals, and keep a record by serial number.
Order the Snap-on QDTPMS35 TPMS screwdriver
SMK Vietnam lists this driver for its partner Lost in HCM, which handles supply and quotes. For a QDTPMS35 price, request a quote from Lost in HCM. You can also compare other torque screwdrivers, visit snapon.com, or contact SMK Vietnam.
QDTPMS35 questions
Which torque values can I select?
Snap-on lists three dedicated settings: 4, 12 and 35 in-lb.
How accurate is the QDTPMS35?
Snap-on rates it at ±6%.
What is it made of?
The catalog says it uses aircraft-grade aluminum.
Reviews
There are no reviews yet.