Description
An excavator undercarriage rebuild means dozens of large bolts, and many sit where a socket is hard to refit. The Snap-on QD4R600A torque wrench keeps the socket on the nut, thanks to its fixed ratchet head. It also has a 3/4″ square drive and an adjustable click scale from 120 to 600 ft-lb. So the operator can move around a bolt pattern without lifting the socket off each time.
Ratchet head or fixed head at this range
Snap-on lists two 3/4″ click wrenches with the same 120-600 ft-lb scale. The QD4600A has a fixed head, while the QD4R600A adds the ratchet. A fixed head suits bench work and final checks, because the head has fewer moving parts. However, a ratchet saves time when the swing arc is short or the nut sits deep in a frame. Choose the QD4R600A when access, not raw torque, slows your crew down.
Heavy equipment jobs for the Snap-on QD4R600A torque wrench
- Track shoe and sprocket bolts on excavators and dozers.
- Slewing ring bolts on cranes and mid-size excavators.
- Counterweight, axle and frame bolts on wheel loaders.
- Base bolts for large pumps, compressors and gearboxes in plant rooms.
Check each target against the scale before the job starts. A value near the middle of the QD4R600A range usually gives the most consistent click.
Working from metric drawings
The QD4R600A uses an SAE scale in ft-lb, so metric specs need a quick conversion. One ft-lb equals about 1.356 N·m. For example, the 120 ft-lb low end works out near 163 N·m, and the 600 ft-lb top sits close to 813 N·m. Therefore a 650 N·m spec becomes roughly 479 ft-lb on this wrench. Write the converted value on the job card, so the next shift skips the math.
Pull technique on a 3/4 in handle
At 600 ft-lb, posture matters as much as the setting. Hold the QD4R600A by its grip, pull at a right angle to the handle and keep the motion smooth. Stop as soon as you feel the click, because extra travel adds load past the target. Also brace your feet, since a heavy pull can shift your balance when the joint seats.
Care between shifts
After each job, wipe grit from the ratchet head and the drive square. Then wind the Snap-on QD4R600A torque wrench down to its lowest setting before storage, because a loaded spring loses tension over time. Never use it to free a seized bolt; a breaker bar handles that task. In addition, most quality plans send heavy wrenches to an independent lab for a calibration check on a fixed cycle, or after any drop.
Get a quote for the Snap-on QD4R600A torque wrench
SMK Vietnam lists the QD4R600A for our partner Lost in HCM, which supplies the tool and handles every quote. Tell them the quantity and your site, then request a quote from Lost in HCM. You can compare other torque wrenches in our catalog, or contact SMK Vietnam with a question. Snap-on also publishes brand details on snapon.com.
QD4R600A questions from rebuild shops
Is the QD4R600A the ratchet version of the QD4600A?
Going by the model names, yes. Both list 120-600 ft-lb on a 3/4″ drive, while the QD4R600A adds the fixed ratchet head.
Can I set N·m values directly?
No. The QD4R600A scale reads in ft-lb, so convert metric specs first. Divide N·m by about 1.356 to get ft-lb.
Who ships the wrench?
Lost in HCM supplies the QD4R600A and confirms price, stock and delivery in its quote. SMK Vietnam does not hold stock.
Reviews
There are no reviews yet.