Snap-on QCDTC3250 torque checker, electronic digital bench unit with 1/2 and 3/8 inch drives

Snap-on QCDTC3250 Torque Checker, Electronic Digital, 1/2″ and 3/8″ Drive, 25-250 ft-lb

Name: Snap-on QCDTC3250 Torque Checker, Electronic Digital, 1/2" and 3/8" Drive, 25-250 ft-lb
Brand: Snap-on
SKU: LIH-QCDTC3250
Availability: InStock

The Snap-on QCDTC3250 torque checker is an electronic digital checker with 1/2″ and 3/8″ drives and a 25-250 ft-lb range. Tool cribs use it to spot drifting click wrenches between outside calibrations. Lost in HCM supplies it in Vietnam.

SKU: LIH-QCDTC3250

Category: Torque Testers & Calibration Systems

Brands: Snap-on

Description

A torque wrench can drift for months before anyone notices. The Snap-on QCDTC3250 torque checker gives your team a fast way to catch it. This electronic digital checker accepts 1/2″ and 3/8″ drives and reads from 25 to 250 ft-lb. So one bench unit can screen most of the click wrenches in a typical shop.

What the Snap-on QCDTC3250 torque checker does

You set a wrench to a known value, fit it to the checker, then pull until it clicks. The display shows the torque the wrench actually delivered. If the reading strays from the setting, you pull the tool from service before it reaches a product.

Two drives, one bench

Most shops own both 3/8″ and 1/2″ wrenches. Because this checker takes both drive sizes, you avoid a second unit and extra adapters. In addition, the 25-250 ft-lb span lines up with the most common mid-range wrenches.

For example, a crib with ten 3/8″ wrenches and ten 1/2″ wrenches can check all twenty on the QCDTC3250 at one station. As a result, the daily check fits into a short slot before the shift starts.

A simple shift-start routine

First, pick two or three settings that match your daily work.
Then pull each wrench at those settings and note the reading.
Next, tag any tool that falls outside your plant’s limit.
Finally, keep the log with your quality records for audits.

That routine takes a few minutes, yet it gives QA a clear trail between outside checks.

Know its limits

An in-house checker does not replace formal calibration. Instead, it fills the months between visits to an accredited lab. Also have the QCDTC3250 itself checked by an outside lab on a regular cycle, so its own readings stay trustworthy.

Buy the Snap-on QCDTC3250 torque checker in Vietnam

Lost in HCM supplies this tester and prepares each quote. To get pricing and lead time, request a quote from Lost in HCM. You can also compare other torque testers and calibration systems, or contact SMK Vietnam. Product data appears on snapon.com.