Snap-on MTMP7000 Torque Multiplier, 1/2″ Drive Input, 9,500 N·m Plate Style Manual

Description

At 9,500 N·m, a joint is far beyond any hand wrench. The Snap-on MTMP7000 torque multiplier brings that load within reach of one technician and a 1/2 in drive torque wrench. It is a plate style manual unit, so it needs no air line, pump or battery.

Why metric-first teams like it

Many drawings from European and Asian OEMs give torque in N·m only. Since the Snap-on MTMP7000 torque multiplier carries a 9,500 N·m rating, engineers can compare it with their bolt chart without converting units. In addition, a manual tool keeps the kit simple for sites with no power at the joint.

Plate style reaction, in plain terms

Every multiplier pushes back as it tightens. On a plate style unit, a flat reaction plate takes that force against a nearby bolt, lug or frame. The plate design often fits joints where a long arm would hit something. However, the plate still needs a solid contact point, so plan it before you lift the tool into place.

Set-up steps

• Fit the right impact-rated socket to the output drive.
• Place the unit on the nut and turn it until the plate meets a firm stop.
• Work out the input value from the ratio on the label.
• Then turn the input wrench smoothly until it clicks.

Typical heavy joints

Teams reach for the Snap-on MTMP7000 torque multiplier on wind tower flanges, mill and crusher bases, large slewing rings and ship engine mounts. It also suits pipeline and pressure vessel flanges during a shutdown. Because it is heavy, use a lifting aid or a second person on overhead work.

Confirm before ordering

The listing names the 1/2 in drive and the 9,500 N·m rating but not the output drive. So ask Lost in HCM to confirm the output size, the ratio and the plate shape in the quote. Also check that your 1/2 in torque wrench covers the input value you need. Finally, send both tools for an independent calibration check at the interval your quality system sets.

Order the Snap-on MTMP7000 torque multiplier

SMK Vietnam lists this tool for our partner Lost in HCM, who supplies it and gives the price. To start, request a quote from Lost in HCM. You can also compare other torque multipliers, see the official Snap-on site, or contact SMK Vietnam.

FAQ

Is 9,500 N·m the input or the output?

It is the rated output. The 1/2 in drive is where your torque wrench goes in.

Which output drive does it have?

The listing does not state it. Lost in HCM confirms the output drive with your quote.

How does it compare with the MTMP4400?

Both are 1/2 in drive plate style units. The MTMP4400 has a lower 6,000 N·m rating, so it suits slightly smaller joints.