Description
Most workshops already own a good 1/2 in torque wrench. The Snap-on MTMC1475 torque multiplier lets that wrench do much heavier work. This compact manual unit has a 1/2 in input and a 1 in output, and it carries a 1,475 ft-lb rating, which is roughly 2,000 N·m.
Multiplier or a bigger wrench?
A 1 in drive torque wrench for this range is long and heavy. It also needs space to swing and a strong operator to pull it. In contrast, a multiplier stays close to the nut, so it fits where a long handle cannot. The operator applies a modest input force, and the gears do the rest. For many teams, that makes the multiplier the safer and cheaper route.
Key data
The listing for the Snap-on MTMC1475 torque multiplier gives three figures: a 1/2 in input drive, a 1 in output drive and a 1,475 ft-lb rating. It is a compact, manual design, so there is no motor, hose or battery to look after.
Working out the input value
Look up the gear ratio and any correction factor on the tool label or in the Snap-on manual. Then divide your target by that number to find the input setting. For best accuracy, pick an input wrench that reaches this setting in the middle of its scale.
Workshop uses for the Snap-on MTMC1475 torque multiplier
Truck and bus garages use a tool in this class on wheel nuts, U-bolts and axle flanges. Plant maintenance teams also use it on motor bases, couplings and mid-size pump flanges. In addition, it suits forklift and generator service, where the joint is heavy but space is tight.
Habits that protect accuracy
- Seat the reaction foot against a solid point before you load the tool.
- Turn the input wrench in one smooth pull to the click.
- Never use the multiplier as a breaker bar on rusted bolts.
- Store it clean and dry in its case after each job.
Also remember that the result relies on two tools. So send both the multiplier and the input wrench for an independent calibration check at the interval your quality plan sets.
How to order
SMK Vietnam lists the Snap-on MTMC1475 torque multiplier for our partner Lost in HCM, who supplies it and gives the quote. For a firm price and delivery date, request a quote from Lost in HCM. You can also see other torque multipliers, visit the official Snap-on site, or contact SMK Vietnam.
FAQ
Why does it use a 1/2 in input?
A 1/2 in input lets you drive it with a common workshop torque wrench, so you do not need a large wrench too.
What is 1,475 ft-lb in N·m?
It works out to roughly 2,000 N·m.
Can one person use it?
Yes. Once the reaction foot sits on a firm point, one technician can run it.
Reviews
There are no reviews yet.