Description
Not every RF job needs a premium analyzer. A Rigol DSA815-TG spectrum analyzer rental gives you a benchtop instrument from 9 kHz to 1.5 GHz, plus a built-in tracking generator. So a team can check sub-GHz radio modules, sweep filters and run first-pass EMI scans without a large outlay.

What the tracking generator adds
A plain analyzer only listens. With a tracking generator, the DSA815-TG also sends a swept signal that follows its own tuning. As a result, you can measure how a filter, cable or amplifier responds across frequency. For example, a production line can confirm a SAW filter or an antenna cable before it goes into a product.
Pre-compliance before the chamber
Accredited EMI chamber time is costly and hard to book. Therefore many teams run a rough scan first, and a Rigol DSA815-TG spectrum analyzer rental keeps that step cheap. The DSA815-TG accepts an optional EMI filter and quasi-peak detector, so it can run CISPR-style pre-scans on a conducted or radiated set-up. Then the team fixes the obvious problems before the formal test.
Limits to keep in mind
The top frequency is 1.5 GHz. That covers 433, 868 and 915 MHz bands, but it does not reach 2.4 GHz Wi-Fi or Bluetooth. If your work goes higher, ask Lost in HCM about a wider-range model instead.
Key specifications
- Frequency range from 9 kHz to 1.5 GHz.
- Displayed average noise level of -135 dBm typical, or -155 dBm with the preamp.
- Resolution bandwidth down to 100 Hz.
- Built-in tracking generator.
- Optional EMI filter and quasi-peak detector.
- An 8-inch WVGA display.
Where a Rigol DSA815-TG spectrum analyzer rental fits
Module makers rent it for LoRa, Zigbee and sub-GHz production checks. Facility teams use it to hunt ISM-band interference on a factory floor. Teaching labs rent a few for an RF course. In addition, it is a sensible try-before-you-buy option for a team that plans its first RF bench.
Kit and ordering
Each Rigol DSA815-TG spectrum analyzer rental ships with a power cord, an N-type to SMA adapter, a USB cable and the maker’s user manual. A calibration certificate and a printed rental checklist come with it too. Our partner Lost in HCM handles the booking, and SMK Vietnam lists it for them. To ask about free dates, request a quote from Lost in HCM. You can also browse other spectrum analyzer rentals, visit the official Rigol site, or contact SMK Vietnam.
FAQ
Does the DSA815-TG cover 2.4 GHz?
No. Its range stops at 1.5 GHz, so it suits sub-GHz work only.
Is the EMI option part of the rental?
The EMI filter and quasi-peak detector are optional. Ask Lost in HCM to confirm them in your quote.
Which adapter comes with it?
The kit includes an N-type to SMA adapter, so most module and cable connectors fit.
















Reviews
There are no reviews yet.