Description
Light fasteners need a light touch. The CDI 752MFRMH torque wrench starts at just 5 ft-lb and tops out at 75 ft-lb, on a 3/8-inch drive. It also reads 10.2-98.3 N·m, so metric and imperial specs both work on one handle.
The low end of the CDI ft-lb range
CDI, a Snap-on company, offers a ladder of adjustable click wrenches. The CDI 752MFRMH torque wrench sits at the bottom rung. Therefore it suits joints where a bigger wrench would feel coarse, such as thin covers, plastic parts with inserts and small brackets.
| Model | Drive | ft-lb | N·m |
|---|---|---|---|
| 752MFRMH | 3/8″ | 5-75 | 10.2-98.3 |
| 1002MFRMH | 3/8″ | 10-100 | 16.9-132.2 |
| 1503MFRMH | 1/2″ | 20-150 | 34-197 |
| 2503MFRMH | 1/2″ | 30-250 | 47-332 |
| 4004MFRMH | 3/4″ | 80-400 | 85-491 |
Jobs that suit a light setting
Small engine builders use a wrench like this on heads, covers and carburetor mounts. In addition, electronics plants use it on fixtures, test jigs and conveyor guides. HVAC and pump teams also reach for it when they service fan hubs and small motor bases. In each case, the goal stays the same: stop at the right load and avoid stripped threads.
Setting tips for low values
At low torque, small habits make a big difference. Pull slowly, because a fast jerk can overshoot before the click. Also keep the socket square on the fastener, and avoid long extensions where you can. If you can, set the target a little above the bottom of the scale rather than right on it.
Care between jobs
Always wind the handle down after use, so the spring rests. Then wipe off oil and store the wrench in its case. Most quality teams also book an outside calibration check at fixed intervals.
Ask for a CDI 752MFRMH torque wrench quote
Lost in HCM supplies this wrench, and it handles price and delivery questions directly. Please request a quote from Lost in HCM to start. For bigger sizes, see our torque wrench listings, or contact SMK Vietnam. You will find CDI details on the CDI Torque website.
Questions about the 752MFRMH
What is the lowest setting?
The ft-lb scale starts at 5 ft-lb, and the N·m scale starts at 10.2 N·m.
Which CDI model is next up?
The 1002MFRMH, also 3/8-inch drive, covers 10-100 ft-lb.
Does SMK Vietnam sell it directly?
No. Lost in HCM supplies it and quotes it, while SMK Vietnam lists it.
Reviews
There are no reviews yet.