Description
A teaching lab needs a scope that every student can read at a glance. The Tektronix TBS1052C oscilloscope gives two channels, 50 MHz of bandwidth and a 7-inch color screen. It samples at up to 1 GS/s and keeps 20,000 points per record. Lost in HCM lists it for rental and sale.
TBS1052C specifications
| Series | TBS1000C |
| Analog channels | 2 |
| Analog bandwidth | 50 MHz |
| Maximum sample rate | 1 GS/s |
| Record length | 20,000 points |
| Vertical resolution | 8 bits |
| Display | 7-inch WVGA color |
| Standard passive probes | TPP0100, one per channel |
What 50 MHz covers on the Tektronix TBS1052C oscilloscope
Sensor outputs, low-voltage control signals and timing relationships sit comfortably inside this bandwidth. Students see a clean trace without a steep learning curve. Technicians can also use it for first-pass circuit troubleshooting. However, check the fastest edge you care about before you commit to this model.
Two channels for cause and effect
One probe on an input and one on an output shows how a circuit responds. For example, you can watch a control line and a sensor reading side by side. The front-panel controls keep the timebase, trigger and vertical adjustments close at hand, so a class can learn them quickly.
How much time fits in a record
At 1 GS/s, a 20,000-point record spans 20 microseconds. A slower timebase stretches the window, and the sample rate then drops. So match the timebase to the event, and save the setup with your notes.
Probing with care
Compensate each passive probe before you measure. Choose probes whose bandwidth and voltage ratings suit the signal. Never clip a standard ground lead to a live mains conductor or an arbitrary floating node. Instead, use a correctly rated differential or isolated measurement system when the circuit needs one.
Rent a class set or buy one bench scope
A course, an audit or a short project suits a rental of the Tektronix TBS1052C oscilloscope, and a lab with daily use may buy. SMK Vietnam only shows the listing. Request a quote from Lost in HCM with the model, your application, the accessories you need and your delivery date. The quote confirms the exact configuration, probes and calibration status. You can also browse oscilloscopes, read about the series on the Tektronix website, or contact SMK Vietnam.
Questions about the Tektronix TBS1052C oscilloscope
Is 50 MHz enough for sensor and control signals?
Usually, when the signals are slow next to the bandwidth. Compare your fastest edge with 50 MHz, or look at the 70 MHz TBS1072C and 200 MHz TBS1202C.
Can I probe mains circuits with the standard probes?
No. Use a correctly rated differential or isolated measurement system when the circuit calls for one.
Which probes come as standard?
The specifications list TPP0100 passive probes, one per channel. Confirm the supplied accessories in the quote.
Reviews
There are no reviews yet.