Snap-on TER602FUA Torqometer, US/N·m Follow-up Dial Wrench, 3/4″ Drive, 800 N·m / 600 ft-lb

Description

A big plant project moves through phases, and each phase asks for different proof. This page covers the plain code of the Snap-on TER602FUA Torqometer. Lost in HCM’s listing title reads “U.S./ New. Met. Follow-up – TER602FUA”. For a version with a document in the box, see the TER602FUAC with a calibration certificate. Both codes name one 3/4 inch tool.

The code rule behind the TER602FUA

Under its Torqometer tables, CAT1500i notes that chart codes leave the certificate of calibration out. Because of that, the TER602FUA and the TER602FUAC differ only in the paperwork. So the right pick depends on where your project stands.

Matching the Snap-on TER602FUA Torqometer to a project phase

Construction and commissioning

EPC contractors and owner’s engineers often check every gauge that touches a critical joint. During this phase, a certificate on arrival can keep inspections moving. So the C code tends to suit the first wave of tools.

Handover and operation

Later, the plant’s own maintenance team takes over. By then, it usually has a lab contract and a recall list. Here the plain TER602FUA fits well, because the team’s own checks build the record.

Spares and backups

Many sites also keep a second large wrench for outages. In that role, a plain TER602FUA that you check against a certified unit can save budget.

What the TER602FUA row in CAT1500i shows

• Drive: 3/4 in.
• Metric reading: up to 800 N·m, graduated every 20 N·m.
• Imperial reading: up to 600 ft-lb, graduated every 20 ft-lb.
• Footprint: 40-7/8 in long by 3-1/4 in wide, with a 1-25/32 in deep head (drive not counted).
• Case: PB39.

Snap-on files the row under Precise 1% Accuracy. Here, one needle tracks the targeted torque and a second tracks the torque achieved. In addition, the TER602A Basic and TER602LA signal codes share the row.

Working safely with the TER602FUA

A tool this long needs space and a steady stance. Also, Snap-on says never to break fasteners loose with a Torqometer, and never to exceed rated torque. Periodic recalibration, Snap-on adds, keeps the dial accurate. Therefore book outside checks on a cycle your quality plan sets.

Requesting a quote: Snap-on TER602FUA Torqometer

For the TER602FUA, Lost in HCM handles supply in Vietnam and sends the quote. List the plain code on your request, because the C version is a separate item. Then reach Lost in HCM about the TER602FUA, browse our torque wrench section, or contact SMK Vietnam.

TER602FUA project FAQ

Can we change codes between project phases?

The code is fixed at purchase. Still, a contract lab can test a plain TER602FUA later and issue its own report.

Is there a signal-light TER602?

Yes, the TER602LA, which flashes a light at the target. It appears beside the TER602FUA in CAT1500i.