Description
Harvest season in the Mekong Delta leaves little time for breakdowns. Combine harvesters, small tractors, rice transplanters and irrigation pumps all need fast, correct repairs. The Snap-on QD275A torque wrench suits the mid-size bolts on that equipment. It pairs a 3/8″ square drive and fixed head with an adjustable click range of 15 to 75 ft-lb.
Farm machinery bolts in the 15-75 ft-lb band
Big wheel nuts and axle bolts on tractors sit far above this range. However, a long list of smaller joints falls right inside it. For example, engine covers, pump housings, header brackets and cutter bar hardware often call for moderate values. So a dealer workshop or farm co-op can use the QD275A for much of its daily repair work, then keep a larger wrench for wheels.
Using the Snap-on QD275A torque wrench in a dealer workshop
- Water pump, thermostat housing and oil pan bolts on small diesel engines.
- Hydraulic pump and valve mounting bolts.
- Header, reel and cutter bar brackets on harvesters.
- Irrigation pump flange and base bolts.
Check the service manual for each value, because makers from Japan, China and Korea set their own specs. The fixed head of the Snap-on QD275A torque wrench then delivers the final pull after a speed wrench runs the bolt down.
Converting metric farm manuals
Most farm machines in Vietnam ship with metric manuals. To set the QD275A, divide the N·m value by 1.356. Thus 30 N·m becomes about 22 ft-lb, and 90 N·m becomes about 66 ft-lb. At the ends of the scale, 15 ft-lb equals about 20 N·m, while 75 ft-lb equals about 102 N·m.
Field care in dust and mud
A wrench that rides out to a paddy field faces mud, water and heat. Therefore, keep the QD275A in its case on the service truck. Wipe it dry before you put it away, and keep grit out of the scale area. Wind the setting down to 15 ft-lb after use. Then plan a regular calibration check, because a season of hard use can shift the reading.
Ordering the QD275A for your workshop
SMK Vietnam lists this wrench, and our partner Lost in HCM supplies it and quotes every order. To get a price for your workshop, request a quote from Lost in HCM. You can also compare other torque wrenches, contact SMK Vietnam, or read about the brand at snapon.com.
Farm workshop FAQ
Is the Snap-on QD275A torque wrench strong enough for tractor wheel nuts?
Usually not. Tractor wheel nuts often need more than 75 ft-lb, the top of the QD275A scale, so use a 1/2″ or 3/4″ drive wrench for them.
Does the QD275A show N·m?
No. The QD275A scale reads in ft-lb. Divide an N·m spec by 1.356 to find the setting.
Can a farm co-op order the QD275A through SMK Vietnam?
SMK Vietnam lists the QD275A, but Lost in HCM supplies it. Use the quote button, and Lost in HCM will reply with price and lead time.
Reviews
There are no reviews yet.