Rigol MSO7024 Oscilloscope, 200 MHz, 4 Analog + 16 Digital Channels, 10 GSa/s

Description

Design teams hit a peak when a board first powers up, and a few weeks later the peak is gone. The Rigol MSO7024 oscilloscope suits that surge, with 200 MHz on 4 analog channels, 16 digital channels and an external trigger input. Lost in HCM offers it for rent or purchase and arranges service when you ask.

Sizing the Rigol MSO7024 oscilloscope for a peak

A peak needs capacity more than a long-term asset does. For example, rent a scope with enough channels, and the whole team can share one capture of rails, clocks and buses. The listing places the MSO7000 family at embedded design, serial bus timing, power measurements and automated laboratory testing. Therefore that range covers most first-article work on a new controller board.

What changes from the MSO7014

On the listed figures, bandwidth is the only change. The Rigol MSO7024 oscilloscope lists 200 MHz, and the MSO7014 lists 100 MHz. Both list 4 analog channels, 16 digital channels and an external trigger, so the wiring plan stays the same. As a result, you can choose by the fastest edge on your board and keep the same channel plan.

Reading the capture line

The top sample rate of 10 GSa/s needs a single channel. Half-channel mode gives 5 GSa/s, while 2.5 GSa/s applies with all channels on. In addition, standard memory is 100 Mpts on a single channel, and up to 500 Mpts is optional. The enabled channels share it, so a full channel plan leaves less depth per channel. Meanwhile, the capture rate reaches up to 600,000 waveforms per second under specified test conditions, and resolution rises up to 12 bit in high-resolution mode.

Quote checklist

• Name the logic probes, because the listing does not.
• Say whether you need the 2-channel 25 MHz generator, which the listing calls optional.
• State the memory option you want, standard or the 500 Mpts upgrade.
• Give the delivery site and the rental period, or ask about a purchase.

Then request a quote from Lost in HCM. SMK Vietnam only shows the listing, and Lost in HCM supplies the unit. You can compare siblings in the oscilloscope category, read the maker’s pages at Rigol, or contact SMK Vietnam for help.

MSO7024 questions

Does the MSO7024 have a 10.1-inch screen?

Yes. The listing gives a 10.1-inch capacitive multi-touch display with 1024 x 600 pixels.

Can I run all 20 inputs at 10 GSa/s?

No. The 10 GSa/s figure applies to one channel, and the rate falls as you enable more.

Is the optional generator included?

Not by default. The listing calls the 2-channel 25 MHz generator optional, so request it in your quote.